What is the Additional Feature ?

Name: BMP180
Brand: Bosch Sensortec
SKU: BMP180
Price: 2.40 USD
Availability: InStock
Rating: 5 (2 reviews)

Any Feature, including a modified Existing Feature, that is not an Existing Feature.

Cart ( )

lmages are for reference only See Product Specifications

Bosch Sensortec BMP180

Part No.:: BMP180

Manufacturer:: Bosch Sensortec

Package:: 7-VLGA

Datasheet:: BMP180.pdf

Description:: SENSOR PRESSURE ABS

In Stock:: 3912

Quantity:: Add To Cart

For more detailed including pricing and shipping

: Quick response, quick quotation

: Flash shipment, no worries after sales

: Original channel, guarantee of the authentic products

Please send RFQ , we will respond immediately.

Purchase and inquiry

BMP180 Specifications

Package/Case:
7-VLGA
Packaging:
Tape & Reel (TR),Cut Tape (CT),Digi-Reel®
Series:
-
ProductStatus:
Obsolete
Applications:
Board Mount
PressureType:
Absolute
OperatingPressure:
4.35PSI ~ 15.95PSI (30kPa ~ 110kPa)
OutputType:
I²C
Output:
16 ~ 19 b
Accuracy:
±2%
Voltage-Supply:
1.62V ~ 3.6V
PortSize:
-
PortStyle:
No Port
Features:
-
TerminationStyle:
SMD (SMT) Tab
MaximumPressure:
145.04PSI (1000kPa)
OperatingTemperature:
-40°C ~ 85°C

BMP180 this integrated circuit is available in factory sealed anti static packs. at icwhale.com. Please read product page below detail information. including BMP180 price, data-sheet, in-stock availability, technical difficulties. Also. Quickly Enter the access of compare listing to find out replaceable electronic parts. If you want to retrieve comprehensive data for BMP180 to optimize the supply chain (including cross references, life-cycle, parametric, counterfeit risk, obsolescence managements forecasts), please contact to our Tech-supports team.

Purchase in icwhale.com

There is no doubt that you may place an order without registering to icwhale.com.

We strongly suggest you sign in our shop before purchasing as you can track your order real-time tracking.

Means of Payment in icwhale.com

For your convenience, we support multiple payment methods in USD, including PayPal, Credit Card, wire transfer. and Alipay.

RFQ (Request for Quotations) in icwhale.com

It is recommended to acquire for quotations to get the latest prices and inventories about the parts.

Our sales will reply to your request by email within 24 hours.

Warm reminder

1. You'll receive an order information email in your email inbox. (Please remember to check the spam folder if you didn't hear from us).

2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping & Handling

Shipping fee starts at $35, but some countries will exceed $35. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)

The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and countries.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, UPS and China Post.

Order Tracking for International Orders

Once your order has been shipped, the tracking number will be sent to the email address registered to your account. This information can also be viewed when logged into your account in the "my account" page.

BMP180 information

Views：

BMP180 Typical application Circuitry

BMP180

Bosch Sensortec's BMP180 is a high-precision, extremely low-power barometric pressure sensor. This sensor is commonly used for applications in weather stations, altitude detection, and various kinds of environmental monitoring. For those planning to integrate this sensor into their system, it's crucial to understand the detailed circuit connections required.

1. VCC (Pin 1): The first pin on the BMP180 should be connected to the power supply. Typically, this should be a 3.3V source, although the BMP180 can handle up to 3.6V. To ensure stable operation, connect a 100nF decoupling capacitor between this VCC pin and the ground.

2. GND (Pin 2): The circuit cannot be completed without the ground pin. The universal common ground of the system should be linked to this pin.

3. SCL (Pin 3): The I2C interface's clock line is located on this pin. Connect this to the SCL line on your microcontroller. When connecting multiple devices to the same I2C bus, make sure to use a pull-up resistor, usually around 4.7kΩ, connected to the VCC line.

4. SDA (Pin 4): The I2C interface's data line is located on this pin. Just like the SCL pin, this should be connected to the SDA line on your microcontroller. As with the SCL line, use a pull-up resistor if multiple devices share the I2C bus.

5. EOC (Pin 5): The End of Conversion (EOC) pin can be left unconnected if you do not require an interrupt to indicate the end of a data conversion cycle. Otherwise, you can connect this pin to an interrupt-enabled GPIO on your microcontroller.

6. XCLR (Pin 6): This is the reset pin for the BMP180. Typically, this pin is not required for most applications and is generally left unconnected. However, if you wish to reset the sensor manually, you can connect this to a GPIO on your microcontroller and drive it low to reset the BMP180.

7. SDO (Pin 7): This pin is the address select line and can be either connected to GND or left unconnected. When connected to ground, the I2C address becomes 0xEE. If not connected, the address will be 0xEF.

By meticulously wiring these pins, you're setting the stage for precise barometric measurements using the BMP180. It's strongly advised to refer to the datasheet for the BMP180 for any specific operational limitations or recommendations. Ensure that you cross-verify any potential voltage mismatches or I2C address conflicts to guarantee seamless operation.

BMP180 FAQ

1. How to order BMP180 on icwhale.com?

Currently, icwhale.com only provide peer-to-peer order processing. While you submit the RFQ, our professional agent will contact you with the competitive prices in the global market, and our agent will prompt you to finish the order if you accept our offers.

2. How does icwhale.com guarantee that BMP180 is from the original manufacturer or authorized agents?

We have a professional and experienced quality control team to strictly verify and test the BMP180. All suppliers must pass our qualification reviews before they can publish their products including BMP180 on icwhale.com; we pay more attention to the channels and quality of BMP180 products than any other customer. We strictly implement supplier audits, so you can purchase with confidence.

3. Are the BMP180 price and inventory displayed accurate?

The price and inventory of BMP180 fluctuates frequently and cannot be updated in time, it will be updated periodically within 24 hours. And, our quotation usually expires after 5 days.

4. What forms of payment are accepted?

Wire Transfer, PayPal, Alipay, Wechat, Credit Card, Western Union, MoneyGram, and Escrow are all acceptable.

Warm Tips: Some orders in certain payment forms may require handling fee.

5. How is the shipping arranged?

Customers can choose industry-leading freight companies, including DHL, UPS, FedEx, TNT, and Registered Mail. Shipping insurance is also available.

Once your order has been processed for shipment, our salesperson will send you an email advising you of the shipping status and tracking number.

Warm Tips: It may take up to 24 hours for the carriers to display tracking information. Usually, express delivery takes 3-5 days, and registered mail takes 25-60 days.

6. What is the process for return or replacement of BMP180?

All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment. If there is something wrong with the BMP180 we delivered, we will accept the replacement or return of the BMP180 only when all of the below conditions are fulfilled:

(1)Such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.

(2)We are informed of the defect described above within 90 days after the delivery of BMP180.

(3)The PartNo is unused and only in the original unpacked packaging.

Two processes to return the products:

(1)Inform us within 90 days

(2)Obtain Requesting Return Authorizations