What is the Additional Feature ?

Name: MCP4562T-104E/MF
Brand: Microchip Technology
SKU: MCP4562T-104E/MF
Price: 2.40 USD
Availability: InStock
Rating: 5 (2 reviews)

Any Feature, including a modified Existing Feature, that is not an Existing Feature.

Cart ( )

lmages are for reference only See Product Specifications

Microchip Technology MCP4562T-104E/MF

Part No.:: MCP4562T-104E/MF

Manufacturer:: Microchip Technology

Package:: 8-VDFN Exposed Pad

Datasheet:: MCP4562T-104E/MF.pdf

Description:: IC DGTL POT 100KOHM 257TAP 8DFN

In Stock:: 2680

Quantity:: Add To Cart

For more detailed including pricing and shipping

: Quick response, quick quotation

: Flash shipment, no worries after sales

: Original channel, guarantee of the authentic products

Please send RFQ , we will respond immediately.

Purchase and inquiry

MCP4562T-104E/MF Specifications

Package/Case:
8-VDFN Exposed Pad
Packaging:
Tape & Reel (TR),Cut Tape (CT),Digi-Reel®
Series:
-
ProductStatus:
Active
Taper:
Linear
Configuration:
Rheostat
NumberofCircuits:
1
NumberofTaps:
257
Resistance(Ohms):
100k
Interface:
I²C
MemoryType:
Non-Volatile
Voltage-Supply:
1.8V ~ 5.5V
Features:
Mute, Selectable Address
Tolerance:
±20%
TemperatureCoefficient(Typ):
150ppm/°C
MountingType:
Surface Mount
OperatingTemperature:
-40°C ~ 125°C

MCP4562T-104E/MF this integrated circuit is available in factory sealed anti static packs. at icwhale.com. Please read product page below detail information. including MCP4562T-104E/MF price, data-sheet, in-stock availability, technical difficulties. Also. Quickly Enter the access of compare listing to find out replaceable electronic parts. If you want to retrieve comprehensive data for MCP4562T-104E/MF to optimize the supply chain (including cross references, life-cycle, parametric, counterfeit risk, obsolescence managements forecasts), please contact to our Tech-supports team.

Purchase in icwhale.com

There is no doubt that you may place an order without registering to icwhale.com.

We strongly suggest you sign in our shop before purchasing as you can track your order real-time tracking.

Means of Payment in icwhale.com

For your convenience, we support multiple payment methods in USD, including PayPal, Credit Card, wire transfer. and Alipay.

RFQ (Request for Quotations) in icwhale.com

It is recommended to acquire for quotations to get the latest prices and inventories about the parts.

Our sales will reply to your request by email within 24 hours.

Warm reminder

1. You'll receive an order information email in your email inbox. (Please remember to check the spam folder if you didn't hear from us).

2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping & Handling

Shipping fee starts at $35, but some countries will exceed $35. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)

The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and countries.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, UPS and China Post.

Order Tracking for International Orders

Once your order has been shipped, the tracking number will be sent to the email address registered to your account. This information can also be viewed when logged into your account in the "my account" page.

MCP4562T-104E/MF information

Views：

MCP4562T-104E/MF Application Introduction

MCP4562T-104E/MF is a digitally controlled precision potentiometer commonly used in various electronic applications for voltage regulation, gain adjustment, and offset trimming.

Application Scenario:

In audio equipment, MCP4562T-104E/MF can be utilized for volume control, equalization, and signal conditioning, providing precise and reliable audio adjustments.

Circuit Design:

To effectively incorporate MCP4562T-104E/MF into a design project, consider the following optimization techniques:

1. Power Management:

Implement proper power supply filtering and regulation to ensure stable voltage levels for MCP4562T-104E/MF operation. Use low-dropout voltage regulators and bypass capacitors to minimize noise and improve performance.

2. Signal Integrity:

Design the PCB layout to minimize signal distortion and interference. Keep traces short and use ground planes or shielding to reduce noise coupling. Place decoupling capacitors near the power pins of MCP4562T-104E/MF to suppress high-frequency noise.

3. Thermal Management:

Ensure adequate heat dissipation for MCP4562T-104E/MF to prevent overheating and maintain long-term reliability. Use thermal vias and heat sinks if necessary, and place the device away from heat sources or components generating excessive heat.

4. Analog Signal Routing:

Route analog signals with care to minimize crosstalk and interference. Separate analog and digital signal traces, use ground planes or guard traces for sensitive analog signals, and avoid routing them near high-speed digital signals or power lines.

5. Stability and Compensation:

Take measures to ensure stability and compensate for non-idealities in MCP4562T-104E/MF. Use appropriate compensation techniques, such as adding feedback capacitors or resistors, to optimize the frequency response and transient behavior of the potentiometer.

Considerations:

When designing with MCP4562T-104E/MF, pay attention to the following factors:

- Input and Output Range: Ensure that the input and output voltage ranges of MCP4562T-104E/MF match the requirements of the application to avoid signal clipping or distortion.

- Digital Interface Configuration: Configure the digital control interface of MCP4562T-104E/MF according to the communication protocol used in the system (e.g., I2C or SPI) and set appropriate addressing or control registers for desired operation.

- Noise and Distortion: Minimize noise sources and distortion mechanisms in the circuit design to maintain high signal fidelity and audio quality. Use low-noise components and shield sensitive circuitry from external interference.

- Calibration and Testing: Calibrate MCP4562T-104E/MF for optimal performance and conduct thorough testing to verify functionality, accuracy, and reliability under expected operating conditions.

MCP4562T-104E/MF FAQ

1. How to order MCP4562T-104E/MF on icwhale.com?

Currently, icwhale.com only provide peer-to-peer order processing. While you submit the RFQ, our professional agent will contact you with the competitive prices in the global market, and our agent will prompt you to finish the order if you accept our offers.

2. How does icwhale.com guarantee that MCP4562T-104E/MF is from the original manufacturer or authorized agents?

We have a professional and experienced quality control team to strictly verify and test the MCP4562T-104E/MF. All suppliers must pass our qualification reviews before they can publish their products including MCP4562T-104E/MF on icwhale.com; we pay more attention to the channels and quality of MCP4562T-104E/MF products than any other customer. We strictly implement supplier audits, so you can purchase with confidence.

3. Are the MCP4562T-104E/MF price and inventory displayed accurate?

The price and inventory of MCP4562T-104E/MF fluctuates frequently and cannot be updated in time, it will be updated periodically within 24 hours. And, our quotation usually expires after 5 days.

4. What forms of payment are accepted?

Wire Transfer, PayPal, Alipay, Wechat, Credit Card, Western Union, MoneyGram, and Escrow are all acceptable.

Warm Tips: Some orders in certain payment forms may require handling fee.

5. How is the shipping arranged?

Customers can choose industry-leading freight companies, including DHL, UPS, FedEx, TNT, and Registered Mail. Shipping insurance is also available.

Once your order has been processed for shipment, our salesperson will send you an email advising you of the shipping status and tracking number.

Warm Tips: It may take up to 24 hours for the carriers to display tracking information. Usually, express delivery takes 3-5 days, and registered mail takes 25-60 days.

6. What is the process for return or replacement of MCP4562T-104E/MF?

All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment. If there is something wrong with the MCP4562T-104E/MF we delivered, we will accept the replacement or return of the MCP4562T-104E/MF only when all of the below conditions are fulfilled:

(1)Such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.

(2)We are informed of the defect described above within 90 days after the delivery of MCP4562T-104E/MF.

(3)The PartNo is unused and only in the original unpacked packaging.

Two processes to return the products:

(1)Inform us within 90 days

(2)Obtain Requesting Return Authorizations