LM358DR this integrated circuit is available in factory sealed anti static packs. at icwhale.com. Please read product page below detail information. including LM358DR price, data-sheet, in-stock availability, technical difficulties. Also. Quickly Enter the access of compare listing to find out replaceable electronic parts. If you want to retrieve comprehensive data for LM358DR to optimize the supply chain (including cross references, life-cycle, parametric, counterfeit risk, obsolescence managements forecasts), please contact to our Tech-supports team.
There is no doubt that you may place an order without registering to icwhale.com.
We strongly suggest you sign in our shop before purchasing as you can track your order real-time tracking.
For your convenience, we support multiple payment methods in USD, including PayPal, Credit Card, wire transfer. and Alipay.
It is recommended to acquire for quotations to get the latest prices and inventories about the parts.
Our sales will reply to your request by email within 24 hours.
1. You'll receive an order information email in your email inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.
Shipping fee starts at $35, but some countries will exceed $35. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and countries.
Currently, our products are shipped through DHL, FedEx, SF, UPS and China Post.
Once your order has been shipped, the tracking number will be sent to the email address registered to your account. This information can also be viewed when logged into your account in the "my account" page.
Views:
In contemporary-day electronics, sign amplification is important for correct and green sign processing. Whether for a interest mission or commercial system, amplifying susceptible alerts with out including noise or distortion is critical. Operational amplifiers, specifically twin models, play a key function in reaching this goal.
An operational amplifier is a flexible tool that plays diverse sign processing tasks, consisting of amplifying voltage alerts. Op-amps are important in analog electronics, specifically because of their cappotential to increase small alerts with precision, making them crucial in lots of circuits.
The aforementioned twin operational amplifier gives various blessings that make it an awesome preference for boosting sign amplification for your design. This issue affords excessive enter impedance and coffee output impedance, which permits susceptible alerts to be amplified effectively. It balances overall performance with cost-performance, making it a famous preference in packages from audio gadgets to commercial equipment.
When choosing an operational amplifier to your mission, information its functions and the way they make a contribution to sign amplification is important. The Rohm Semiconductor version in query stands proud with numerous functions that optimize sign processing:
A fantastic function is its low energy consumption, making it appropriate for battery-operated gadgets in which electricity performance is crucial. Despite its minimum energy draw, it nevertheless affords sturdy amplification overall performance, making it perfect for packages prioritizing energy savings.
This amplifier helps a huge variety of deliver voltages, commonly from 3V to 32V, permitting it for use in diverse circuits with out requiring complicated energy deliver configurations. Whether you're designing a easy circuit with a unmarried energy supply or a greater complicated system, this version can accommodate numerous voltage requirements.
With two independent operational amplifiers housed in a single 8-pin package, this dual configuration offers versatile design options. For instance, one amplifier can be dedicated to signal amplification, while the other is used for filtering or additional signal processing tasks, all within the same compact unit.
The low input offset voltage is a critical parameter that determines how accurately the device amplifies the input signal. This model's low offset ensures that even small signals are amplified without significant errors, a vital factor in applications where precision is key, such as sensor signal amplification.
The versatility of this dual op-amp model makes it suitable for numerous applications. Here are some examples of how it enhances signal amplification in different scenarios:
In audio systems, amplifying indicators with out introducing noise or distortion is important for handing over amazing sound. The low noise traits and excessive slew price make certain that audio indicators are amplified cleanly and efficiently, making this op-amp perfect for speaker systems, microphone preamps, and different audio applications.
Many sensors generate vulnerable indicators that want amplification earlier than in addition processing. This version is good for sensor sign amplification because of its excessive enter impedance and occasional enter offset voltage. It correctly amplifies small sensor outputs, including the ones from temperature or stress sensors, with out compromising sign quality.
In business settings, specific sign processing is regularly required for manipulate systems. The huge deliver voltage variety and strong overall performance of this op-amp make it well-perfect for business applications, including motor manipulate circuits or method automation, making sure strong and dependable sign amplification.
Integrating this operational amplifier into your circuit layout is straightforward. Here are some recommendations that will help you get the maximum out of it:
To make certain strong operation, right electricity deliver decoupling is essential. Place capacitors close to the electricity pins to filter noise and save you fluctuations withinside the electricity deliver from affecting overall performance. A mixture of a small ceramic capacitor (round 0.1µF) and a bigger electrolytic capacitor (10µF or more) is commonly effective.
The feedback network you choose will determine the gain and behavior of your amplifier circuit. For voltage amplification, a resistive feedback network is commonly used. The resistor ratio in the feedback network sets the amplifier's gain, and experimenting with different resistor values will help achieve the desired amplification for your application.
Good grounding practices are crucial in analog circuit design to minimize noise and interference. Ensure that ground connections are short and direct, particularly in sensitive signal paths. Proper grounding will help achieve the best signal-to-noise ratio from your operational amplifier.
In the world of operational amplifiers, there are many options, each with its features and advantages. This specific model strikes a balance between performance, cost, and ease of use. Whether designing consumer electronics, automotive systems, or industrial equipment, this op-amp offers a solid mix of features for enhancing signal amplification.
Compared to others in its class, this operational amplifier offers a good combination of low power consumption, wide voltage range, and dual configuration. While other op-amps may excel in specific areas like bandwidth or noise performance, they often come with higher costs or more complex design requirements. This model provides a reliable solution for most general-purpose amplification tasks without the need for excessive optimization.
The Texas Instruments LM358DR is well-regarded for its versatility and reliability, particularly in circuits requiring dual op-amps in a compact form factor. Moreover, its availability in a surface-mount package, specifically the IC OPAMP GP 2 CIRCUIT 8SOIC, makes it easy to integrate into designs with space constraints. From consumer electronics to medical devices, this component offers the flexibility to tackle various challenges without concerns over compatibility or performance.
Enhancing signal amplification in your design requires choosing components that offer a balance of performance, cost-effectiveness, and ease of use. This dual operational amplifier delivers on all these fronts, making it a strong choice for a range of applications. With its low power consumption, wide supply voltage range, and dual op-amp configuration, it is suitable for everything from audio amplification to industrial control systems. Integrating this op-amp into your design will ensure precise and efficient signal amplification, helping your circuits achieve optimal performance.
Currently, icwhale.com only provide peer-to-peer order processing. While you submit the RFQ, our professional agent will contact you with the competitive prices in the global market, and our agent will prompt you to finish the order if you accept our offers.
We have a professional and experienced quality control team to strictly verify and test the LM358DR. All suppliers must pass our qualification reviews before they can publish their products including LM358DR on icwhale.com; we pay more attention to the channels and quality of LM358DR products than any other customer. We strictly implement supplier audits, so you can purchase with confidence.
The price and inventory of LM358DR fluctuates frequently and cannot be updated in time, it will be updated periodically within 24 hours. And, our quotation usually expires after 5 days.
Wire Transfer, PayPal, Alipay, Wechat, Credit Card, Western Union, MoneyGram, and Escrow are all acceptable.
Warm Tips: Some orders in certain payment forms may require handling fee.
Customers can choose industry-leading freight companies, including DHL, UPS, FedEx, TNT, and Registered Mail. Shipping insurance is also available.
Once your order has been processed for shipment, our salesperson will send you an email advising you of the shipping status and tracking number.
Warm Tips: It may take up to 24 hours for the carriers to display tracking information. Usually, express delivery takes 3-5 days, and registered mail takes 25-60 days.
All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment. If there is something wrong with the LM358DR we delivered, we will accept the replacement or return of the LM358DR only when all of the below conditions are fulfilled:
(1)Such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.
(2)We are informed of the defect described above within 90 days after the delivery of LM358DR.
(3)The PartNo is unused and only in the original unpacked packaging.
Two processes to return the products:
(1)Inform us within 90 days
(2)Obtain Requesting Return Authorizations
If you need any after-sales service, please do not hesitate to contact us.
Texas Instruments
Texas Instruments
Texas Instruments
Texas Instruments
STMicroelectronics
STMicroelectronics
Texas Instruments
Texas Instruments
ON Semiconductor
ON Semiconductor
Texas Instruments
Texas Instruments
Analog Devices Inc.
ON Semiconductor
Analog Devices Inc.
Analog Devices Inc.
Texas Instruments
Texas Instruments
Analog Devices Inc.
Texas Instruments
Phone