What is the Additional Feature ?

Name: TPS2HB16AQPWPRQ1
Brand: Texas Instruments
SKU: TPS2HB16AQPWPRQ1
Price: 2.40 USD
Availability: InStock
Rating: 5 (2 reviews)

Any Feature, including a modified Existing Feature, that is not an Existing Feature.

Cart ( )

lmages are for reference only See Product Specifications

Texas Instruments TPS2HB16AQPWPRQ1

Part No.:: TPS2HB16AQPWPRQ1

Manufacturer:: Texas Instruments

Package:: 16-HTSSOP

Datasheet:: TPS2HB16AQPWPRQ1.pdf

Description:: HYDRA 16 MOHM OTP A

In Stock:: 3148

Quantity:: Add To Cart

For more detailed including pricing and shipping

: Quick response, quick quotation

: Flash shipment, no worries after sales

: Original channel, guarantee of the authentic products

Please send RFQ , we will respond immediately.

Purchase and inquiry

TPS2HB16AQPWPRQ1 Specifications

Package/Case:
16-HTSSOP
Packaging:
Tape & Reel (TR),Cut Tape (CT),Digi-Reel®
Series:
Automotive, AEC-Q100
ProductStatus:
Active
SwitchType:
General Purpose
NumberofOutputs:
2
Ratio-Input:Output:
1:1
OutputConfiguration:
High Side
OutputType:
N-Channel
Interface:
On/Off
Voltage-Load:
3V ~ 28V
Voltage-Supply(Vcc/Vdd):
Not Required
Current-Output(Max):
60A
RdsOn(Typ):
16mOhm
InputType:
-
Features:
-
FaultProtection:
Current Limiting (Adjustable), Over Temperature
OperatingTemperature:
-40°C ~ 125°C (TA)
MountingType:
Surface Mount

TPS2HB16AQPWPRQ1 this integrated circuit is available in factory sealed anti static packs. at icwhale.com. Please read product page below detail information. including TPS2HB16AQPWPRQ1 price, data-sheet, in-stock availability, technical difficulties. Also. Quickly Enter the access of compare listing to find out replaceable electronic parts. If you want to retrieve comprehensive data for TPS2HB16AQPWPRQ1 to optimize the supply chain (including cross references, life-cycle, parametric, counterfeit risk, obsolescence managements forecasts), please contact to our Tech-supports team.

Purchase in icwhale.com

There is no doubt that you may place an order without registering to icwhale.com.

We strongly suggest you sign in our shop before purchasing as you can track your order real-time tracking.

Means of Payment in icwhale.com

For your convenience, we support multiple payment methods in USD, including PayPal, Credit Card, wire transfer. and Alipay.

RFQ (Request for Quotations) in icwhale.com

It is recommended to acquire for quotations to get the latest prices and inventories about the parts.

Our sales will reply to your request by email within 24 hours.

Warm reminder

1. You'll receive an order information email in your email inbox. (Please remember to check the spam folder if you didn't hear from us).

2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping & Handling

Shipping fee starts at $35, but some countries will exceed $35. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)

The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and countries.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, UPS and China Post.

Order Tracking for International Orders

Once your order has been shipped, the tracking number will be sent to the email address registered to your account. This information can also be viewed when logged into your account in the "my account" page.

TPS2HB16AQPWPRQ1 information

Views：

TPS2HB16AQPWPRQ1 Typical application Circuitry

TPS2HB16AQPWPRQ1

The TPS2HB16AQPWPRQ1 is a load switch integrated circuit designed for power distribution and management in electronic devices, particularly in automotive applications. It is intended to control the supply voltage to various components or subsystems, providing overcurrent protection and efficient power management.

Key Parameters and Features:

1. Low On-Resistance: The TPS2HB16AQPWPRQ1 offers low on-resistance, which reduces voltage drop and power dissipation when the switch is in the on state.

2. Overcurrent Protection: It features overcurrent protection to prevent excessive current flow, safeguarding connected devices and ensuring safety.

3. Low Quiescent Current: The chip has a low quiescent current, minimizing power consumption when the switch is in the off state, helping extend battery life.

4. Input Voltage Range: It can operate within a specified input voltage range, typically allowing it to interface with a variety of power sources, especially suitable for automotive applications.

Application Scenario: Automotive Exterior Lighting Control

In this scenario, we will use the TPS2HB16AQPWPRQ1 in a circuit that controls the power distribution for automotive exterior lighting, offering overcurrent protection and efficient power management.

Circuit Connection:

1. Input Voltage (Pin 1): Connect Pin 1 (VIN) to the vehicle's power supply, typically from the battery or another power source.

2. Output Voltage (Pin 2): Connect Pin 2 (VOUT) to the input of the automotive exterior lighting circuitry.

3. Enable Control (Pin 3): Connect Pin 3 (EN) to a control signal source, such as a microcontroller's GPIO pin or a sensor output, to enable or disable the exterior lighting.

4. Ground (Pin 4): Connect Pin 4 (GND) to the common ground reference of the vehicle's electrical system.

Design Considerations:

1. Overcurrent Protection: Set the overcurrent protection threshold to a safe value, taking into account the maximum current requirements of the automotive exterior lighting.

2. Input Voltage Compatibility: Ensure that the input voltage (VIN) is within the acceptable range for both the TPS2HB16AQPWPRQ1 and the exterior lighting circuitry.

3. Enable Control: Implement a reliable enable/disable mechanism for the TPS2HB16AQPWPRQ1, allowing the exterior lighting to be controlled as needed for safety and energy efficiency.

4. Quiescent Current: Minimize quiescent current to reduce power consumption when the switch is in the off state, preserving vehicle battery life.

5. Efficiency: Evaluate the overall efficiency of the exterior lighting control circuit, considering voltage drop across the TPS2HB16AQPWPRQ1 switch and power losses.

6. Heat Dissipation: Address heat dissipation concerns, especially if the chip is expected to handle higher currents. Adequate heat sinking or thermal management may be necessary.

7. EMI/EMC Considerations: Ensure that the circuit complies with electromagnetic interference (EMI) and electromagnetic compatibility (EMC) standards, especially in automotive applications where interference can affect other vehicle electronics.

By following these guidelines and the specified connections, you can effectively use the TPS2HB16AQPWPRQ1 in an automotive exterior lighting control circuit, providing overcurrent protection, controlled power management, and efficient power distribution while addressing key design considerations for automotive lighting applications.

TPS2HB16AQPWPRQ1 FAQ

1. How to order TPS2HB16AQPWPRQ1 on icwhale.com?

Currently, icwhale.com only provide peer-to-peer order processing. While you submit the RFQ, our professional agent will contact you with the competitive prices in the global market, and our agent will prompt you to finish the order if you accept our offers.

2. How does icwhale.com guarantee that TPS2HB16AQPWPRQ1 is from the original manufacturer or authorized agents?

We have a professional and experienced quality control team to strictly verify and test the TPS2HB16AQPWPRQ1. All suppliers must pass our qualification reviews before they can publish their products including TPS2HB16AQPWPRQ1 on icwhale.com; we pay more attention to the channels and quality of TPS2HB16AQPWPRQ1 products than any other customer. We strictly implement supplier audits, so you can purchase with confidence.

3. Are the TPS2HB16AQPWPRQ1 price and inventory displayed accurate?

The price and inventory of TPS2HB16AQPWPRQ1 fluctuates frequently and cannot be updated in time, it will be updated periodically within 24 hours. And, our quotation usually expires after 5 days.

4. What forms of payment are accepted?

Wire Transfer, PayPal, Alipay, Wechat, Credit Card, Western Union, MoneyGram, and Escrow are all acceptable.

Warm Tips: Some orders in certain payment forms may require handling fee.

5. How is the shipping arranged?

Customers can choose industry-leading freight companies, including DHL, UPS, FedEx, TNT, and Registered Mail. Shipping insurance is also available.

Once your order has been processed for shipment, our salesperson will send you an email advising you of the shipping status and tracking number.

Warm Tips: It may take up to 24 hours for the carriers to display tracking information. Usually, express delivery takes 3-5 days, and registered mail takes 25-60 days.

6. What is the process for return or replacement of TPS2HB16AQPWPRQ1?

All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment. If there is something wrong with the TPS2HB16AQPWPRQ1 we delivered, we will accept the replacement or return of the TPS2HB16AQPWPRQ1 only when all of the below conditions are fulfilled:

(1)Such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.

(2)We are informed of the defect described above within 90 days after the delivery of TPS2HB16AQPWPRQ1.

(3)The PartNo is unused and only in the original unpacked packaging.

Two processes to return the products:

(1)Inform us within 90 days

(2)Obtain Requesting Return Authorizations