lmages are for reference only See Product Specifications

Texas Instruments TPS2041BDGN

Part No.:
Texas Instruments
In Stock:
  Add To Cart
For more detailed including pricing and shipping
Quick response, quick quotation
Flash shipment, no worries after sales
Original channel, guarantee of the authentic products

Please send RFQ , we will respond immediately.

Part Number
Email / phone number*
Contact Name / Company Name
  • Purchase and inquiryPurchase and inquiry

    TPS2041BDGN this integrated circuit is available in factory sealed anti static packs. at Please read product page below detail information. including TPS2041BDGN price, data-sheet, in-stock availability, technical difficulties. Also. Quickly Enter the access of compare listing to find out replaceable electronic parts. If you want to retrieve comprehensive data for TPS2041BDGN to optimize the supply chain (including cross references, life-cycle, parametric, counterfeit risk, obsolescence managements forecasts), please contact to our Tech-supports team.

    Purchase in

    There is no doubt that you may place an order without registering to

    We strongly suggest you sign in our shop before purchasing as you can track your order real-time tracking.

    Means of Payment in

    For your convenience, we support multiple payment methods in USD, including PayPal, Credit Card, wire transfer. and Alipay.

    RFQ (Request for Quotations) in

    It is recommended to acquire for quotations to get the latest prices and inventories about the parts.

    Our sales will reply to your request by email within 24 hours.

    Warm reminder

    1. You'll receive an order information email in your email inbox. (Please remember to check the spam folder if you didn't hear from us).

    2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

    Shipping & Handling

    Shipping fee starts at $35, but some countries will exceed $35. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)

    The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and countries.

    Shipping Method

    Currently, our products are shipped through DHL, FedEx, SF, UPS and China Post.

    Order Tracking for International Orders

    Once your order has been shipped, the tracking number will be sent to the email address registered to your account. This information can also be viewed when logged into your account in the "my account" page.


    TPS2041BDGN Typical application Circuitry


    The TPS2041BDGN is a semiconductor device recognized for its specific functionality, suitability in various application scenarios, and characterized by distinct technical features.

    Functionality of TPS2041BDGN

    The TPS2041BDGN functions as a single-channel, current-limited power distribution switch. Its primary role is to manage the flow of power in electronic circuits efficiently, featuring overcurrent protection and thermal shutdown capabilities, thereby enhancing the safety and reliability of power management systems.

    Application Scenarios

    This chip is commonly used in:

    - USB Power Distribution: Managing power in USB hubs and ports.

    - Portable Devices: Power management in smartphones, tablets, and other portable electronics.

    - Consumer Electronics: Controlling power in various consumer electronic products.

    - Industrial Applications: Power distribution in industrial machinery and equipment.

    Key Specifications

    - Current Limiting: Protects against overcurrent conditions.

    - Thermal Shutdown Feature: Safeguards against overheating.

    - Low On-Resistance (RDS(on)): Minimizes power loss, enhancing efficiency.

    - Fast Transient Response: Quickly adapts to changes in load conditions.

    Application Example: Power Management in a Portable Device

    Consider using the TPS2041BDGN for power management in a portable device like a digital camera. Here's a detailed circuit connection guide:

    Circuit Connection Guide

    1. Power Input (VIN Pin): Connect this pin to the camera's battery or main power source.

    2. Load Output (VOUT Pin): Attach this pin to a component in the camera requiring controlled power, like the digital display.

    3. Enable Control (EN Pin): Link this pin to a control signal, usually from a microcontroller, for switching the power distribution on and off.

    4. Ground Connection (GND Pin): Establish a common ground for stable operation.

    5. Overcurrent Protection: Utilize the chip's current limiting feature for safeguarding against excessive current.

    6. Thermal Management: Account for the thermal shutdown feature to prevent device overheating.

    7. Decoupling Capacitors: Place capacitors near the VIN and VOUT pins for voltage stabilization and noise reduction.

    8. Efficiency Consideration: Leverage the low RDS(on) for energy-efficient power transfer.

    Design Considerations

    When designing with the TPS2041BDGN, consider the following:

    - Load Requirements: Understand the power demands of the camera's components.

    - Control Signal Compatibility: Ensure the microcontroller's output is compatible with the EN pin's logic level.

    - Circuit Safety: Implement additional protection mechanisms as needed.

    - Compact Design: Take advantage of the chip's small size in space-limited applications.

    - Energy Optimization: Focus on minimizing power loss for efficient operation.

    - Reliability: Ensure consistent performance under various operating conditions.

    - Noise Suppression: Apply layout techniques to minimize electrical interference.

    - Regulatory Compliance: Adhere to standards applicable to portable electronic devices.

    By adhering to these design principles and correctly implementing the pin connections, the TPS2041BDGN can effectively manage power in portable electronic devices, enhancing overall functionality, efficiency, and safety.

    TPS2041BDGN informationTPS2041BDGN information


    1. How to order TPS2041BDGN on

    Currently, only provide peer-to-peer order processing. While you submit the RFQ, our professional agent will contact you with the competitive prices in the global market, and our agent will prompt you to finish the order if you accept our offers.

    2. How does guarantee that TPS2041BDGN is from the original manufacturer or authorized agents?

    We have a professional and experienced quality control team to strictly verify and test the TPS2041BDGN. All suppliers must pass our qualification reviews before they can publish their products including TPS2041BDGN on; we pay more attention to the channels and quality of TPS2041BDGN products than any other customer. We strictly implement supplier audits, so you can purchase with confidence.

    3. Are the TPS2041BDGN price and inventory displayed accurate?

    The price and inventory of TPS2041BDGN fluctuates frequently and cannot be updated in time, it will be updated periodically within 24 hours. And, our quotation usually expires after 5 days.

    4. What forms of payment are accepted?

    Wire Transfer, PayPal, Alipay, Wechat, Credit Card, Western Union, MoneyGram, and Escrow are all acceptable.

    Warm Tips: Some orders in certain payment forms may require handling fee.

    5. How is the shipping arranged?

    Customers can choose industry-leading freight companies, including DHL, UPS, FedEx, TNT, and Registered Mail. Shipping insurance is also available.

    Once your order has been processed for shipment, our salesperson will send you an email advising you of the shipping status and tracking number.

    Warm Tips: It may take up to 24 hours for the carriers to display tracking information. Usually, express delivery takes 3-5 days, and registered mail takes 25-60 days.

    6. What is the process for return or replacement of TPS2041BDGN?

    All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment. If there is something wrong with the TPS2041BDGN we delivered, we will accept the replacement or return of the TPS2041BDGN only when all of the below conditions are fulfilled:

    (1)Such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.

    (2)We are informed of the defect described above within 90 days after the delivery of TPS2041BDGN.

    (3)The PartNo is unused and only in the original unpacked packaging.

    Two processes to return the products:

    (1)Inform us within 90 days

    (2)Obtain Requesting Return Authorizations

    7.How to contact us to get technical supports, such as TPS2041BDGN pin diagram, TPS2041BDGN datasheet?

    If you need any after-sales service, please do not hesitate to contact us.

    Hot Products







    Contact Us