lmages are for reference only See Product Specifications

Analog Devices Inc. LTM4644IY#PBF

Part No.:
Analog Devices Inc.
77-BBGA Module
In Stock:
  Add To Cart
For more detailed including pricing and shipping
Quick response, quick quotation
Flash shipment, no worries after sales
Original channel, guarantee of the authentic products

Please send RFQ , we will respond immediately.

Part Number
Email / phone number*
Contact Name / Company Name
  • Purchase and inquiryPurchase and inquiry

    LTM4644IY#PBF this integrated circuit is available in factory sealed anti static packs. at Please read product page below detail information. including LTM4644IY#PBF price, data-sheet, in-stock availability, technical difficulties. Also. Quickly Enter the access of compare listing to find out replaceable electronic parts. If you want to retrieve comprehensive data for LTM4644IY#PBF to optimize the supply chain (including cross references, life-cycle, parametric, counterfeit risk, obsolescence managements forecasts), please contact to our Tech-supports team.

    Purchase in

    There is no doubt that you may place an order without registering to

    We strongly suggest you sign in our shop before purchasing as you can track your order real-time tracking.

    Means of Payment in

    For your convenience, we support multiple payment methods in USD, including PayPal, Credit Card, wire transfer. and Alipay.

    RFQ (Request for Quotations) in

    It is recommended to acquire for quotations to get the latest prices and inventories about the parts.

    Our sales will reply to your request by email within 24 hours.

    Warm reminder

    1. You'll receive an order information email in your email inbox. (Please remember to check the spam folder if you didn't hear from us).

    2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

    Shipping & Handling

    Shipping fee starts at $35, but some countries will exceed $35. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)

    The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and countries.

    Shipping Method

    Currently, our products are shipped through DHL, FedEx, SF, UPS and China Post.

    Order Tracking for International Orders

    Once your order has been shipped, the tracking number will be sent to the email address registered to your account. This information can also be viewed when logged into your account in the "my account" page.


    LTM4644IY#PBF Typical application Circuitry

    LTM4644IY PBF

    LTM4644IY#PBF is a high efficiency, quad output step-down (buck) DC-DC converter chip designed for powering low voltage digital circuits and providing power management solutions.

    Application Scenarios: LTM4644IY#PBF is commonly used in applications that require multiple regulated power supply outputs with high efficiencies, such as telecommunications equipment, networking devices, industrial control systems, and embedded systems. It provides a compact and efficient power solution for powering various digital components in these applications.

    Main Parameters: The high efficiency, low quiescent current, and wide input voltage range of the LTM4644IY#PBF make it ideal for a variety of power supply applications. It provides four independent outputs, allowing for different voltage levels to power different parts of the circuit. The chip supports synchronous rectification, and current mode control, and offers protection features such as overcurrent protection, overvoltage protection, and thermal shutdown.

    Circuit Connection: Let's consider an example circuit using LTM4644IY#PBF to power a system with multiple voltage requirements:

    1. Input Power Connection:

    - Connect the VIN pin of LTM4644IY#PBF to the power supply voltage source (e.g., 12V).

    - Join the LTM4644IY#PBF is GND pin to the power supply's ground reference.

    2. Output 1 (VOUT1) Connection:

    - Connect the VOUT1 pin of LTM4644IY#PBF to the input pin of the first load (e.g., microcontroller or FPGA) that requires a specific voltage level.

    - Join the load's GND pin to the ground reference.

    3. Output 2 (VOUT2) Connection:

    - Connect the VOUT2 pin of LTM4644IY#PBF to the input pin of the second load (e.g., memory module or sensor) that requires a different voltage level.

    - Join the load's GND pin to the ground reference.

    4. Output 3 (VOUT3) Connection:

    - Connect the VOUT3 pin of LTM4644IY#PBF to the input pin of the third load (e.g., display or communication module) that requires another voltage level. - Join the load's GND pin to the ground reference.

    5. Output 4 (VOUT4) Connection:

    - Connect the VOUT4 pin of LTM4644IY#PBF to the input pin of the fourth load (e.g., audio amplifier or motor driver) that requires a different voltage level.

    - Attach the load's GND pin to the ground reference.

    6. Enable and Mode Control:

    - Connect the EN (Enable) pin of LTM4644IY#PBF to the enable signal source (e.g., a microcontroller GPIO pin) to control the power operation.

    - Connect the MODE pin of LTM4644IY#PBF to set the desired operation mode (e.g., pulse skipping or forced continuous) based on the application requirements.

    7. Feedback and Compensation:

    - Connect the FB1, FB2, FB3, and FB4 (Feedback) pins of LTM4644IY#PBF to the voltage feedback resistors for each output to set the desired output voltage levels.

    - Connect the COMP pin of LTM4644IY#PBF to the external compensation components (e.g., resistor and capacitor) to stabilize the control loop and improve transient response.

    Design Considerations: When designing a circuit with LTM4644IY#PBF, consider the following:

    1. Output Voltage and Load Requirements: Determine the required output voltage levels and current ratings for each load in the system.

    2. Efficiency and Heat Dissipation: Consider the power dissipation and thermal management requirements to ensure efficient operation and prevent overheating.

    3. Input and Output Capacitors: Choose appropriate input and output capacitors based on the desired transient response, ripple voltage, and stability.

    4. Protection and Fault Handling: Implement proper protection measures, such as overcurrent and overvoltage protection, to safeguard the circuit and connected devices.

    In summary, LTM4644IY#PBF is a quad output step-down DC-DC converter chip used for efficient power conversion in applications requiring multiple regulated power supply outputs. When designing a circuit with LTM4644IY#PBF, considerations should be given to output voltage requirements, efficiency, thermal management, and protection features for reliable and optimal power delivery.

    LTM4644IY#PBF informationLTM4644IY#PBF information


    1. How to order LTM4644IY#PBF on

    Currently, only provide peer-to-peer order processing. While you submit the RFQ, our professional agent will contact you with the competitive prices in the global market, and our agent will prompt you to finish the order if you accept our offers.

    2. How does guarantee that LTM4644IY#PBF is from the original manufacturer or authorized agents?

    We have a professional and experienced quality control team to strictly verify and test the LTM4644IY#PBF. All suppliers must pass our qualification reviews before they can publish their products including LTM4644IY#PBF on; we pay more attention to the channels and quality of LTM4644IY#PBF products than any other customer. We strictly implement supplier audits, so you can purchase with confidence.

    3. Are the LTM4644IY#PBF price and inventory displayed accurate?

    The price and inventory of LTM4644IY#PBF fluctuates frequently and cannot be updated in time, it will be updated periodically within 24 hours. And, our quotation usually expires after 5 days.

    4. What forms of payment are accepted?

    Wire Transfer, PayPal, Alipay, Wechat, Credit Card, Western Union, MoneyGram, and Escrow are all acceptable.

    Warm Tips: Some orders in certain payment forms may require handling fee.

    5. How is the shipping arranged?

    Customers can choose industry-leading freight companies, including DHL, UPS, FedEx, TNT, and Registered Mail. Shipping insurance is also available.

    Once your order has been processed for shipment, our salesperson will send you an email advising you of the shipping status and tracking number.

    Warm Tips: It may take up to 24 hours for the carriers to display tracking information. Usually, express delivery takes 3-5 days, and registered mail takes 25-60 days.

    6. What is the process for return or replacement of LTM4644IY#PBF?

    All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment. If there is something wrong with the LTM4644IY#PBF we delivered, we will accept the replacement or return of the LTM4644IY#PBF only when all of the below conditions are fulfilled:

    (1)Such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.

    (2)We are informed of the defect described above within 90 days after the delivery of LTM4644IY#PBF.

    (3)The PartNo is unused and only in the original unpacked packaging.

    Two processes to return the products:

    (1)Inform us within 90 days

    (2)Obtain Requesting Return Authorizations

    7.How to contact us to get technical supports, such as LTM4644IY#PBF pin diagram, LTM4644IY#PBF datasheet?

    If you need any after-sales service, please do not hesitate to contact us.

    Hot Products







    Contact Us