What is the Additional Feature ?

Name: DMU-30DCV-3-DR-C
Brand: Murata Power Solutions Inc.
SKU: DMU-30DCV-3-DR-C
Price: 2.40 USD
Availability: InStock
Rating: 5 (2 reviews)

Any Feature, including a modified Existing Feature, that is not an Existing Feature.

Cart ( )

lmages are for reference only See Product Specifications

Murata Power Solutions Inc. DMU-30DCV-3-DR-C

Part No.:: DMU-30DCV-3-DR-C

Manufacturer:: Murata Power Solutions Inc.

Package:

Datasheet:: DMU-30DCV-3-DR-C.pdf

Description:: VOLTMETER 0-199.9VDC LED PNL MT

In Stock:: 3637

Quantity:: Add To Cart

For more detailed including pricing and shipping

: Quick response, quick quotation

: Flash shipment, no worries after sales

: Original channel, guarantee of the authentic products

Please send RFQ , we will respond immediately.

Purchase and inquiry

DMU-30DCV-3-DR-C Specifications

Packaging:
Box
Series:
DMU-30DCV
ProductStatus:
Obsolete
Type:
Voltage (Voltmeter)
MeasuringRange:
0 ~ 199.9VDC
DisplayType:
LED - Red Characters
NumberofCharactersPerRow:
3.5
DisplayCharacters-Height:
0.560 (14.20mm)
OutputType:
-
Voltage-Supply:
85 ~ 264VDC
PanelCutoutDimensions:
Rectangular - 53.80mm x 22.30mm
MountingType:
Panel Mount
TerminationStyle:
Screw Terminal
IngressProtection:
IP65 - Dust Tight, Water Resistant

DMU-30DCV-3-DR-C this integrated circuit is available in factory sealed anti static packs. at icwhale.com. Please read product page below detail information. including DMU-30DCV-3-DR-C price, data-sheet, in-stock availability, technical difficulties. Also. Quickly Enter the access of compare listing to find out replaceable electronic parts. If you want to retrieve comprehensive data for DMU-30DCV-3-DR-C to optimize the supply chain (including cross references, life-cycle, parametric, counterfeit risk, obsolescence managements forecasts), please contact to our Tech-supports team.

Purchase in icwhale.com

There is no doubt that you may place an order without registering to icwhale.com.

We strongly suggest you sign in our shop before purchasing as you can track your order real-time tracking.

Means of Payment in icwhale.com

For your convenience, we support multiple payment methods in USD, including PayPal, Credit Card, wire transfer. and Alipay.

RFQ (Request for Quotations) in icwhale.com

It is recommended to acquire for quotations to get the latest prices and inventories about the parts.

Our sales will reply to your request by email within 24 hours.

Warm reminder

1. You'll receive an order information email in your email inbox. (Please remember to check the spam folder if you didn't hear from us).

2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping & Handling

Shipping fee starts at $35, but some countries will exceed $35. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)

The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and countries.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, UPS and China Post.

Order Tracking for International Orders

Once your order has been shipped, the tracking number will be sent to the email address registered to your account. This information can also be viewed when logged into your account in the "my account" page.

DMU-30DCV-3-DR-C information

Views：

DMU-30DCV-3-DR-C Typical application Circuitry

Function and Application:

The DMU-30DCV-3-DR-C chip is a multifunctional digital signal processor primarily designed for motor control applications. Its advanced features and robust performance make it suitable for various industrial automation and robotics applications.

Key Parameters and Features:

- Motor Control Capabilities: The DMU-30DCV-3-DR-C chip offers comprehensive motor control functionalities, including speed control, torque control, and position control, enabling precise and efficient motor operation.

- Digital Signal Processing: Equipped with powerful digital signal processing capabilities, this chip can execute complex algorithms for motor control and system optimization in real-time.

- Integrated Driver Interface: The chip features an integrated driver interface for seamless connection to external motor drivers, simplifying system integration and reducing component count on the PCB.

- High-Speed Communication: With support for high-speed communication interfaces such as SPI or UART, the DMU-30DCV-3-DR-C chip enables seamless communication with external microcontrollers or control systems.

- Robust Protection Mechanisms: Incorporating various protection mechanisms such as overcurrent protection, overvoltage protection, and thermal shutdown, the chip ensures the safety and reliability of connected motor systems.

Application Scenario:

Implementing the DMU-30DCV-3-DR-C chip in a CNC (Computer Numerical Control) machine demonstrates its effectiveness in precise motor control for machining operations. In this scenario, the chip serves as the central motor control unit, regulating the movement of stepper motors or servo motors to execute precise machining tasks.

Detailed Circuit Integration:

Integrating the DMU-30DCV-3-DR-C chip into the motor control circuitry of a CNC machine requires meticulous attention to various connections and design considerations:

1. Motor Driver Interface (MDI, Pin 1-6): Connect these pins to the input terminals of the external motor drivers to control the speed, direction, and position of the motors. Implement proper signal conditioning and isolation to ensure accurate motor control signals.

2. Communication Interface (COM, Pin 7-9): Interface these pins with the communication ports of the microcontroller or control system using SPI or UART protocols. Ensure proper configuration of communication parameters for seamless data exchange between the chip and the controller.

3. Power Supply (VDD, Pin 10; GND, Pin 11): Connect the VDD pin to a regulated power supply within the specified voltage range to power the chip. Connect the GND pin to the system ground to complete the circuit. Incorporate decoupling capacitors near these pins to ensure stable power supply and suppress noise.

4. Protection Features Configuration (OCP, OVP, TSD): Configure these pins to enable overcurrent protection, overvoltage protection, and thermal shutdown features. Adjust the threshold levels according to the motor specifications and operating conditions to ensure optimal protection against fault conditions.

5. Feedback Interface (FB, Pin 12): Connect this pin to the feedback sensor (e.g., encoder or resolver) to provide position or speed feedback to the chip for closed-loop control. Implement proper signal conditioning and noise filtering to ensure accurate feedback signals.

Design Considerations:

- Motor Compatibility: Ensure compatibility between the DMU-30DCV-3-DR-C chip specifications and the requirements of the CNC machine motors, considering factors such as voltage ratings, current ratings, and motor type (stepper or servo).

- Noise Immunity: Design the circuit layout to minimize electromagnetic interference (EMI) and ensure proper grounding to reduce noise and interference, ensuring reliable motor control operation.

- System Integration: Ensure seamless integration of the chip with the microcontroller or control system, considering communication protocols, data formats, and signal compatibility.

- Safety and Reliability: Implement redundant protection mechanisms and fail-safe features to ensure safe operation of the CNC machine and prevent damage to the motors or harm to users.

- Performance Optimization: Develop efficient motor control algorithms to maximize machining precision, minimize vibration, and optimize energy efficiency, enhancing overall CNC machine performance.

Incorporating the DMU-30DCV-3-DR-C chip into a CNC machine motor control system enhances precision and efficiency, enabling accurate and reliable machining operations. By addressing key design considerations and integrating the chip into the motor control circuitry, engineers can leverage the advanced capabilities of the DMU-30DCV-3-DR-C chip to create high-performance CNC machines for various industrial applications.

DMU-30DCV-3-DR-C FAQ

1. How to order DMU-30DCV-3-DR-C on icwhale.com?

Currently, icwhale.com only provide peer-to-peer order processing. While you submit the RFQ, our professional agent will contact you with the competitive prices in the global market, and our agent will prompt you to finish the order if you accept our offers.

2. How does icwhale.com guarantee that DMU-30DCV-3-DR-C is from the original manufacturer or authorized agents?

We have a professional and experienced quality control team to strictly verify and test the DMU-30DCV-3-DR-C. All suppliers must pass our qualification reviews before they can publish their products including DMU-30DCV-3-DR-C on icwhale.com; we pay more attention to the channels and quality of DMU-30DCV-3-DR-C products than any other customer. We strictly implement supplier audits, so you can purchase with confidence.

3. Are the DMU-30DCV-3-DR-C price and inventory displayed accurate?

The price and inventory of DMU-30DCV-3-DR-C fluctuates frequently and cannot be updated in time, it will be updated periodically within 24 hours. And, our quotation usually expires after 5 days.

4. What forms of payment are accepted?

Wire Transfer, PayPal, Alipay, Wechat, Credit Card, Western Union, MoneyGram, and Escrow are all acceptable.

Warm Tips: Some orders in certain payment forms may require handling fee.

5. How is the shipping arranged?

Customers can choose industry-leading freight companies, including DHL, UPS, FedEx, TNT, and Registered Mail. Shipping insurance is also available.

Once your order has been processed for shipment, our salesperson will send you an email advising you of the shipping status and tracking number.

Warm Tips: It may take up to 24 hours for the carriers to display tracking information. Usually, express delivery takes 3-5 days, and registered mail takes 25-60 days.

6. What is the process for return or replacement of DMU-30DCV-3-DR-C?

All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment. If there is something wrong with the DMU-30DCV-3-DR-C we delivered, we will accept the replacement or return of the DMU-30DCV-3-DR-C only when all of the below conditions are fulfilled:

(1)Such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.

(2)We are informed of the defect described above within 90 days after the delivery of DMU-30DCV-3-DR-C.

(3)The PartNo is unused and only in the original unpacked packaging.

Two processes to return the products:

(1)Inform us within 90 days

(2)Obtain Requesting Return Authorizations