What is the Additional Feature ?

Name: TJA1101BHN/0Z
Brand: NXP USA Inc.
SKU: TJA1101BHN/0Z
Price: 2.40 USD
Availability: InStock
Rating: 5 (2 reviews)

Any Feature, including a modified Existing Feature, that is not an Existing Feature.

Cart ( )

lmages are for reference only See Product Specifications

NXP USA Inc. TJA1101BHN/0Z

Part No.:: TJA1101BHN/0Z

Manufacturer:: NXP USA Inc.

Package:: 36-VFQFN Exposed Pad

Datasheet:: TJA1101BHN/0Z.pdf

Description:: IC TXRX PHY AUTO 1/1 36HVQFN

In Stock:: 3381

Quantity:: Add To Cart

For more detailed including pricing and shipping

: Quick response, quick quotation

: Flash shipment, no worries after sales

: Original channel, guarantee of the authentic products

Please send RFQ , we will respond immediately.

Purchase and inquiry

TJA1101BHN/0Z Specifications

Package/Case:
36-VFQFN Exposed Pad
Packaging:
Tape & Reel (TR),Cut Tape (CT),Digi-Reel®
Series:
-
ProductStatus:
Active
Type:
Transceiver
Protocol:
Ethernet
NumberofDrivers/Receivers:
1/1
Duplex:
Full, Half
ReceiverHysteresis:
500 mV
DataRate:
100Mbps
Voltage-Supply:
1.745V ~ 1.95V, 3.1V ~ 3.5V
OperatingTemperature:
-40°C ~ 125°C (TA)
MountingType:
Surface Mount

TJA1101BHN/0Z this integrated circuit is available in factory sealed anti static packs. at icwhale.com. Please read product page below detail information. including TJA1101BHN/0Z price, data-sheet, in-stock availability, technical difficulties. Also. Quickly Enter the access of compare listing to find out replaceable electronic parts. If you want to retrieve comprehensive data for TJA1101BHN/0Z to optimize the supply chain (including cross references, life-cycle, parametric, counterfeit risk, obsolescence managements forecasts), please contact to our Tech-supports team.

Purchase in icwhale.com

There is no doubt that you may place an order without registering to icwhale.com.

We strongly suggest you sign in our shop before purchasing as you can track your order real-time tracking.

Means of Payment in icwhale.com

For your convenience, we support multiple payment methods in USD, including PayPal, Credit Card, wire transfer. and Alipay.

RFQ (Request for Quotations) in icwhale.com

It is recommended to acquire for quotations to get the latest prices and inventories about the parts.

Our sales will reply to your request by email within 24 hours.

Warm reminder

1. You'll receive an order information email in your email inbox. (Please remember to check the spam folder if you didn't hear from us).

2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping & Handling

Shipping fee starts at $35, but some countries will exceed $35. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)

The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and countries.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, UPS and China Post.

Order Tracking for International Orders

Once your order has been shipped, the tracking number will be sent to the email address registered to your account. This information can also be viewed when logged into your account in the "my account" page.

TJA1101BHN/0Z information

Views：

TJA1101BHN/0Z Typical application Circuitry

TJA1101BHN 0Z

The TJA1101BHN/0Z is a high-speed CAN transceiver designed by NXP Semiconductors. In both 12V and 24V systems, it primarily serves as an interface between the CAN protocol controller and the physical bus.

Application Scenarios: This transceiver is widely used in automotive applications due to its high-speed data transmission capability and excellent electrostatic discharge (ESD) protection. Body control modules, gateway modules, and in-vehicle networks are only a few examples of applications.

Key Parameters: The TJA1101BHN/0Z operates with a supply voltage range of 4.5V to 5.5V, supporting bit rates up to 1 Mbit/s. For strong electromagnetic immunity, it has a differential receiver with a broad common-mode range. Additionally, it is packaged in an HVSON14 package and offers excellent ESD protection of ±8 kV according to the IEC 61000-4-2 standard.

Let's explore an application scenario where the TJA1101BHN/0Z is used in an automotive gateway module:

Power Supply Connection:

1. VCC (Pin 5): This pin should be connected to the power supply within the range as specified in the datasheet.

2. Ground (Pin 3): Connect this pin to the system ground.

3. Power Filtering: To reduce power supply noise, think about adding a decoupling capacitor next to these pins.

CAN Bus Connection:

- CANH (Pin 6), CANL (Pin 7): These pins are for connecting the device to the CAN bus. CANH should be connected to the high side of the bus, and CANL should be connected to the low side.

Microcontroller Connection:

- RXD (Pin 2): This pin should be connected to the RX pin of your microcontroller for receiving data.

- TXD (Pin 1): Connect this pin to the TX pin of your microcontroller for transmitting data.

Standby and Enable:

- STB (Pin 4): Connect this pin to your microcontroller or other control logic to switch the TJA1101BHN/0Z into and out of standby mode.

- ENA (Pin 8): Connect this pin to your microcontroller or other control logic to enable or disable the transceiver.

When designing circuits with the TJA1101BHN/0Z, it's essential to consider the following:

1. Thermal Management: Due to its power dissipation, ensure sufficient cooling measures, such as heat sinks or thermal vias on the PCB.

2. Bus Termination: Proper termination of the CAN bus is critical for communication to work effectively. Typically, a 120-ohm resistor is used at both ends of the bus.

3. ESD Protection: Even though the TJA1101BHN/0Z has excellent ESD protection, it's essential to adopt good ESD handling and PCB layout practices to prevent any possible damage.

4. Power Supply: Make sure the power supply is stable and within the specified range to prevent damage to the chip and ensure reliable operation.

In conclusion, the TJA1101BHN/0Z is a robust and reliable choice for high-speed CAN bus applications, especially in the automotive industry. Adequate consideration should be given to thermal management, bus termination, ESD protection, and power supply stability to achieve the best performance.

TJA1101BHN/0Z FAQ

1. How to order TJA1101BHN/0Z on icwhale.com?

Currently, icwhale.com only provide peer-to-peer order processing. While you submit the RFQ, our professional agent will contact you with the competitive prices in the global market, and our agent will prompt you to finish the order if you accept our offers.

2. How does icwhale.com guarantee that TJA1101BHN/0Z is from the original manufacturer or authorized agents?

We have a professional and experienced quality control team to strictly verify and test the TJA1101BHN/0Z. All suppliers must pass our qualification reviews before they can publish their products including TJA1101BHN/0Z on icwhale.com; we pay more attention to the channels and quality of TJA1101BHN/0Z products than any other customer. We strictly implement supplier audits, so you can purchase with confidence.

3. Are the TJA1101BHN/0Z price and inventory displayed accurate?

The price and inventory of TJA1101BHN/0Z fluctuates frequently and cannot be updated in time, it will be updated periodically within 24 hours. And, our quotation usually expires after 5 days.

4. What forms of payment are accepted?

Wire Transfer, PayPal, Alipay, Wechat, Credit Card, Western Union, MoneyGram, and Escrow are all acceptable.

Warm Tips: Some orders in certain payment forms may require handling fee.

5. How is the shipping arranged?

Customers can choose industry-leading freight companies, including DHL, UPS, FedEx, TNT, and Registered Mail. Shipping insurance is also available.

Once your order has been processed for shipment, our salesperson will send you an email advising you of the shipping status and tracking number.

Warm Tips: It may take up to 24 hours for the carriers to display tracking information. Usually, express delivery takes 3-5 days, and registered mail takes 25-60 days.

6. What is the process for return or replacement of TJA1101BHN/0Z?

All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment. If there is something wrong with the TJA1101BHN/0Z we delivered, we will accept the replacement or return of the TJA1101BHN/0Z only when all of the below conditions are fulfilled:

(1)Such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.

(2)We are informed of the defect described above within 90 days after the delivery of TJA1101BHN/0Z.

(3)The PartNo is unused and only in the original unpacked packaging.

Two processes to return the products:

(1)Inform us within 90 days

(2)Obtain Requesting Return Authorizations