What is the Additional Feature ?

Name: THVD2410DR
Brand: Texas Instruments
SKU: THVD2410DR
Price: 2.40 USD
Availability: InStock
Rating: 5 (2 reviews)

Any Feature, including a modified Existing Feature, that is not an Existing Feature.

Cart ( )

lmages are for reference only See Product Specifications

Texas Instruments THVD2410DR

Part No.:: THVD2410DR

Manufacturer:: Texas Instruments

Package:: 8-SOIC (0.154, 3.90mm Width)

Datasheet:: THVD2410DR.pdf

Description:: IC TRANSCEIVER HALF 1/1 8SOIC

In Stock:: 2311

Quantity:: Add To Cart

For more detailed including pricing and shipping

: Quick response, quick quotation

: Flash shipment, no worries after sales

: Original channel, guarantee of the authentic products

Please send RFQ , we will respond immediately.

Purchase and inquiry

THVD2410DR Specifications

Package/Case:
8-SOIC (0.154, 3.90mm Width)
Packaging:
Tape & Reel (TR),Cut Tape (CT),Digi-Reel®
Series:
-
ProductStatus:
Active
Type:
Transceiver
Protocol:
RS422, RS485
NumberofDrivers/Receivers:
1/1
Duplex:
Half
ReceiverHysteresis:
250 mV
DataRate:
500kbps
Voltage-Supply:
3V ~ 5.5V
OperatingTemperature:
-40°C ~ 125°C (TA)
MountingType:
Surface Mount

THVD2410DR this integrated circuit is available in factory sealed anti static packs. at icwhale.com. Please read product page below detail information. including THVD2410DR price, data-sheet, in-stock availability, technical difficulties. Also. Quickly Enter the access of compare listing to find out replaceable electronic parts. If you want to retrieve comprehensive data for THVD2410DR to optimize the supply chain (including cross references, life-cycle, parametric, counterfeit risk, obsolescence managements forecasts), please contact to our Tech-supports team.

Purchase in icwhale.com

There is no doubt that you may place an order without registering to icwhale.com.

We strongly suggest you sign in our shop before purchasing as you can track your order real-time tracking.

Means of Payment in icwhale.com

For your convenience, we support multiple payment methods in USD, including PayPal, Credit Card, wire transfer. and Alipay.

RFQ (Request for Quotations) in icwhale.com

It is recommended to acquire for quotations to get the latest prices and inventories about the parts.

Our sales will reply to your request by email within 24 hours.

Warm reminder

1. You'll receive an order information email in your email inbox. (Please remember to check the spam folder if you didn't hear from us).

2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping & Handling

Shipping fee starts at $35, but some countries will exceed $35. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)

The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and countries.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, UPS and China Post.

Order Tracking for International Orders

Once your order has been shipped, the tracking number will be sent to the email address registered to your account. This information can also be viewed when logged into your account in the "my account" page.

THVD2410DR information

Views：

THVD2410DR Typical application Circuitry

The THVD2410DR is a half-duplex, robust transceiver designed for RS-485 and RS-422 communication networks. Devices like this are often used in settings that require strong immunity to noise and longer cable runs.

Applications of the THVD2410DR:

1. Industrial Communication Networks

2. Building Automation

3. Motor Control Systems

4. Security Camera Networks

5. Telecommunications Equipment

Key Specifications of the THVD2410DR:

1. Half-duplex RS-485 and RS-422 transceiver.

2. Extended Industrial Temperature Range.

3. High ESD Protection.

4. Low Quiescent Current.

5. Designed for high-speed communication.

Given its applications and features, let's consider the Industrial Communication Network application scenario for the THVD2410DR.

Circuit Connection for an Industrial Communication Network using THVD2410DR:

1. Power Supply:

- Link the VCC pin to a positive supply voltage, typically around 3.3V or 5V, and the GND pin to the system ground. Decoupling capacitors (typically 0.1µF) close to these pins are recommended to ensure stability.

2. Differential Transmission:

- The THVD2410DR has A and B pins for differential communication. Connect the A and B pins to the corresponding differential lines of the RS-485 network.

3. Input/Output:

- The DI (Driver Input) pin is used to send data from your system to the RS-485 bus. Connect this pin to your microcontroller's TX (transmit) pin.
- The RO (Receiver Output) pin provides the data received from the RS-485 bus. Link this pin to the RX (receive) pin of your microcontroller.

4. Driver Control:

- The DE (Driver Enable) pin controls the data transmission. When this pin is high, data from the DI pin is sent to the RS-485 bus. Interface this pin to a GPIO (General Purpose Input/Output) of your microcontroller.

5. Receiver Control:

- The RE (Receiver Enable) pin, when driven low, allows the THVD2410DR to receive data from the RS-485 network. Typically, in half-duplex systems, the DE and RE pins are commonly connected to the same GPIO, ensuring one operation at a time.

Design Considerations:

1. Termination Resistor:

- For longer communication lines or higher data rates, a termination resistor (typically 120 ohms) between the A and B lines at both ends of the RS-485 network can help reduce reflection issues.

2. Biasing:

- To ensure a known state during idle times (no communication), you can add pull-up and pull-down resistors to the A and B lines, respectively.

3. Protection:

- Given that the THVD2410DR might be used in noise-prone industrial settings, consider adding transient voltage suppressors (TVS diodes) for extra protection against surges or ESD events.

4. Ground Potential Differences:

- RS-485 networks often span long distances, leading to potential ground differences. Ensure a common ground reference and consider using ground lift connections or isolators if needed.

To summarize, the THVD2410DR is an integral component in various applications, especially those requiring reliable communication over long distances or in noise-prone environments. Proper design and layout techniques will ensure optimal performance of this versatile transceiver chip.

THVD2410DR FAQ

1. How to order THVD2410DR on icwhale.com?

Currently, icwhale.com only provide peer-to-peer order processing. While you submit the RFQ, our professional agent will contact you with the competitive prices in the global market, and our agent will prompt you to finish the order if you accept our offers.

2. How does icwhale.com guarantee that THVD2410DR is from the original manufacturer or authorized agents?

We have a professional and experienced quality control team to strictly verify and test the THVD2410DR. All suppliers must pass our qualification reviews before they can publish their products including THVD2410DR on icwhale.com; we pay more attention to the channels and quality of THVD2410DR products than any other customer. We strictly implement supplier audits, so you can purchase with confidence.

3. Are the THVD2410DR price and inventory displayed accurate?

The price and inventory of THVD2410DR fluctuates frequently and cannot be updated in time, it will be updated periodically within 24 hours. And, our quotation usually expires after 5 days.

4. What forms of payment are accepted?

Wire Transfer, PayPal, Alipay, Wechat, Credit Card, Western Union, MoneyGram, and Escrow are all acceptable.

Warm Tips: Some orders in certain payment forms may require handling fee.

5. How is the shipping arranged?

Customers can choose industry-leading freight companies, including DHL, UPS, FedEx, TNT, and Registered Mail. Shipping insurance is also available.

Once your order has been processed for shipment, our salesperson will send you an email advising you of the shipping status and tracking number.

Warm Tips: It may take up to 24 hours for the carriers to display tracking information. Usually, express delivery takes 3-5 days, and registered mail takes 25-60 days.

6. What is the process for return or replacement of THVD2410DR?

All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment. If there is something wrong with the THVD2410DR we delivered, we will accept the replacement or return of the THVD2410DR only when all of the below conditions are fulfilled:

(1)Such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.

(2)We are informed of the defect described above within 90 days after the delivery of THVD2410DR.

(3)The PartNo is unused and only in the original unpacked packaging.

Two processes to return the products:

(1)Inform us within 90 days

(2)Obtain Requesting Return Authorizations