What is the Additional Feature ?

Name: MT29F2G16ABAEAWP-AIT:E
Brand: Micron Technology Inc.
SKU: MT29F2G16ABAEAWP-AIT:E
Price: 2.40 USD
Availability: InStock
Rating: 5 (2 reviews)

Any Feature, including a modified Existing Feature, that is not an Existing Feature.

Cart ( )

lmages are for reference only See Product Specifications

Micron Technology Inc. MT29F2G16ABAEAWP-AIT:E

Part No.:: MT29F2G16ABAEAWP-AIT:E

Manufacturer:: Micron Technology Inc.

Package:: 48-TFSOP (0.724, 18.40mm Width)

Datasheet:

Description:: IC FLASH 2GBIT PARALLEL 48TSOP I

In Stock:: 835

Quantity:: Add To Cart

For more detailed including pricing and shipping

: Quick response, quick quotation

: Flash shipment, no worries after sales

: Original channel, guarantee of the authentic products

Please send RFQ , we will respond immediately.

Purchase and inquiry

MT29F2G16ABAEAWP-AIT:E Specifications

Package/Case:
48-TFSOP (0.724, 18.40mm Width)
Packaging:
Tray
Series:
-
ProductStatus:
Active
MemoryType:
Non-Volatile
MemoryFormat:
FLASH
Technology:
FLASH - NAND
MemorySize:
2Gb (128M x 16)
MemoryInterface:
Parallel
ClockFrequency:
-
WriteCycleTime-WordPage:
-
AccessTime:
-
Voltage-Supply:
2.7V ~ 3.6V
OperatingTemperature:
-40°C ~ 85°C (TA)
MountingType:
Surface Mount

MT29F2G16ABAEAWP-AIT:E this integrated circuit is available in factory sealed anti static packs. at icwhale.com. Please read product page below detail information. including MT29F2G16ABAEAWP-AIT:E price, data-sheet, in-stock availability, technical difficulties. Also. Quickly Enter the access of compare listing to find out replaceable electronic parts. If you want to retrieve comprehensive data for MT29F2G16ABAEAWP-AIT:E to optimize the supply chain (including cross references, life-cycle, parametric, counterfeit risk, obsolescence managements forecasts), please contact to our Tech-supports team.

Purchase in icwhale.com

There is no doubt that you may place an order without registering to icwhale.com.

We strongly suggest you sign in our shop before purchasing as you can track your order real-time tracking.

Means of Payment in icwhale.com

For your convenience, we support multiple payment methods in USD, including PayPal, Credit Card, wire transfer. and Alipay.

RFQ (Request for Quotations) in icwhale.com

It is recommended to acquire for quotations to get the latest prices and inventories about the parts.

Our sales will reply to your request by email within 24 hours.

Warm reminder

1. You'll receive an order information email in your email inbox. (Please remember to check the spam folder if you didn't hear from us).

2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping & Handling

Shipping fee starts at $35, but some countries will exceed $35. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)

The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and countries.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, UPS and China Post.

Order Tracking for International Orders

Once your order has been shipped, the tracking number will be sent to the email address registered to your account. This information can also be viewed when logged into your account in the "my account" page.

MT29F2G16ABAEAWP-AIT:E information

Views：

MT29F2G16ABAEAWP-AIT:E Typical application Circuitry

MT29F2G16ABAEAWP-AIT E

MT29F2G16ABAEAWP-AIT:E is a NAND Flash memory device from Micron Technology, designed for a wide array of applications that require high-density, non-volatile storage solutions. This device is particularly suited for embedded systems, consumer electronics, and storage media where reliable data storage and retention are crucial.

Application Scenario: Embedded System for IoT Devices

The MT29F2G16ABAEAWP-AIT:E is ideal for use in embedded systems within IoT devices, such as smart sensors and smart home controllers, where it can store firmware, application data, and log information efficiently.

Parameter Features

- Capacity: 2Gb, offering ample storage for firmware and data logging in compact IoT devices.

- Interface: Parallel NAND interface, providing a standard connection to microcontrollers and processors.

- Voltage: Operates within a 2.7V to 3.6V range, compatible with low-power embedded systems.

- Package: 48-pin TSOP, facilitating easy integration into PCB designs with limited space.

Detailed Circuit Connection for IoT Embedded System

Power Supply Connections

- VCC to Power Source: Connect the VCC pin (typically Pin 24) to a stable power source within the device's operating voltage range, ensuring reliable memory operation.

- Decoupling Capacitor: Place a decoupling capacitor (e.g., 0.1 µF) near the VCC pin to minimize voltage fluctuations and noise on the power supply line.

Data and Control Interface

- Data I/O Pins to Microcontroller: Connect the Data I/O pins (D0-D7, typically Pins 7-14 and 32-39) to corresponding GPIO pins on the microcontroller for data transfer.

- Control Signals to Microcontroller: Route control signals such as CE (Chip Enable, Pin 1), WE (Write Enable, Pin 48), RE (Read Enable, Pin 34), and CLE (Command Latch Enable, Pin 45) from the MT29F2G16ABAEAWP-AIT:E to the microcontroller to manage data operations.

Addressing Configuration

- Address Pins to Microcontroller: Connect the address pins (A0-A7, typically Pins 15-22) to the microcontroller to select specific memory locations for read/write operations.

Grounding

- GND Pins to System Ground: Ensure all GND pins (e.g., Pins 23, 25, 47) are connected to the system's ground plane to provide a stable reference point and minimize electrical noise.

Design Considerations

- Signal Integrity: Ensure proper routing of data, control, and address lines to maintain signal integrity, especially in designs with high-speed data transfers or noisy electrical environments.

- Power Stability: Provide a clean and stable power supply to the MT29F2G16ABAEAWP-AIT:E, with adequate decoupling to handle transient loads during memory operations.

- Environmental Conditions: Consider the operating environment of the IoT device, ensuring the MT29F2G16ABAEAWP-AIT:E and associated circuitry are protected from extreme temperatures, humidity, and potential contaminants.

- Firmware Support: Develop robust firmware that efficiently interfaces with the NAND Flash memory, implementing error correction codes (ECC) and wear-leveling algorithms to enhance data reliability and memory lifespan.

Incorporating the MT29F2G16ABAEAWP-AIT:E into embedded systems for IoT devices provides a reliable and high-capacity storage solution, enabling efficient data management and enhancing the device's functionality and user experience.

MT29F2G16ABAEAWP-AIT:E FAQ

1. How to order MT29F2G16ABAEAWP-AIT:E on icwhale.com?

Currently, icwhale.com only provide peer-to-peer order processing. While you submit the RFQ, our professional agent will contact you with the competitive prices in the global market, and our agent will prompt you to finish the order if you accept our offers.

2. How does icwhale.com guarantee that MT29F2G16ABAEAWP-AIT:E is from the original manufacturer or authorized agents?

We have a professional and experienced quality control team to strictly verify and test the MT29F2G16ABAEAWP-AIT:E. All suppliers must pass our qualification reviews before they can publish their products including MT29F2G16ABAEAWP-AIT:E on icwhale.com; we pay more attention to the channels and quality of MT29F2G16ABAEAWP-AIT:E products than any other customer. We strictly implement supplier audits, so you can purchase with confidence.

3. Are the MT29F2G16ABAEAWP-AIT:E price and inventory displayed accurate?

The price and inventory of MT29F2G16ABAEAWP-AIT:E fluctuates frequently and cannot be updated in time, it will be updated periodically within 24 hours. And, our quotation usually expires after 5 days.

4. What forms of payment are accepted?

Wire Transfer, PayPal, Alipay, Wechat, Credit Card, Western Union, MoneyGram, and Escrow are all acceptable.

Warm Tips: Some orders in certain payment forms may require handling fee.

5. How is the shipping arranged?

Customers can choose industry-leading freight companies, including DHL, UPS, FedEx, TNT, and Registered Mail. Shipping insurance is also available.

Once your order has been processed for shipment, our salesperson will send you an email advising you of the shipping status and tracking number.

Warm Tips: It may take up to 24 hours for the carriers to display tracking information. Usually, express delivery takes 3-5 days, and registered mail takes 25-60 days.

6. What is the process for return or replacement of MT29F2G16ABAEAWP-AIT:E?

All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment. If there is something wrong with the MT29F2G16ABAEAWP-AIT:E we delivered, we will accept the replacement or return of the MT29F2G16ABAEAWP-AIT:E only when all of the below conditions are fulfilled:

(1)Such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.

(2)We are informed of the defect described above within 90 days after the delivery of MT29F2G16ABAEAWP-AIT:E.

(3)The PartNo is unused and only in the original unpacked packaging.

Two processes to return the products:

(1)Inform us within 90 days

(2)Obtain Requesting Return Authorizations