lmages are for reference only See Product Specifications


Part No.:
In Stock:
  Add To Cart
For more detailed including pricing and shipping
Quick response, quick quotation
Flash shipment, no worries after sales
Original channel, guarantee of the authentic products

Please send RFQ , we will respond immediately.

Part Number
Email / phone number*
Contact Name / Company Name
  • Purchase and inquiryPurchase and inquiry

    MKL16Z128VFT4 this integrated circuit is available in factory sealed anti static packs. at Please read product page below detail information. including MKL16Z128VFT4 price, data-sheet, in-stock availability, technical difficulties. Also. Quickly Enter the access of compare listing to find out replaceable electronic parts. If you want to retrieve comprehensive data for MKL16Z128VFT4 to optimize the supply chain (including cross references, life-cycle, parametric, counterfeit risk, obsolescence managements forecasts), please contact to our Tech-supports team.

    Purchase in

    There is no doubt that you may place an order without registering to

    We strongly suggest you sign in our shop before purchasing as you can track your order real-time tracking.

    Means of Payment in

    For your convenience, we support multiple payment methods in USD, including PayPal, Credit Card, wire transfer. and Alipay.

    RFQ (Request for Quotations) in

    It is recommended to acquire for quotations to get the latest prices and inventories about the parts.

    Our sales will reply to your request by email within 24 hours.

    Warm reminder

    1. You'll receive an order information email in your email inbox. (Please remember to check the spam folder if you didn't hear from us).

    2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

    Shipping & Handling

    Shipping fee starts at $35, but some countries will exceed $35. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)

    The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and countries.

    Shipping Method

    Currently, our products are shipped through DHL, FedEx, SF, UPS and China Post.

    Order Tracking for International Orders

    Once your order has been shipped, the tracking number will be sent to the email address registered to your account. This information can also be viewed when logged into your account in the "my account" page.


    MKL16Z128VFT4 Typical application Circuitry


    The MKL16Z128VFT4 is a versatile microcontroller unit (MCU) from NXP Semiconductors, featuring an ARM Cortex-M0+ core. This MCU is well-suited for applications in low-power, space-constrained environments such as wearable devices, medical monitoring systems, and smart sensors.

    Key Features of MKL16Z128VFT4

    1. ARM Cortex-M0+ Core: Operates at up to 48 MHz, providing a good balance between power efficiency and processing capability.

    2. Flash Memory: 128KB of on-chip flash memory, suitable for storing application code and data.

    3. RAM: 16KB of RAM, providing adequate space for runtime data.

    4. I/O Options: Includes diverse peripherals such as I2C, SPI, and UART for communication; multiple GPIOs for interfacing with sensors and actuators; and ADCs for analog signal processing.

    5. Low Power Modes: Features several low-power modes, making it ideal for battery-operated devices.

    Application Scenario: Remote Environmental Sensing System

    In a remote environmental sensing system, the MKL16Z128VFT4 can function as the central processor, managing sensor data collection, data processing, and communication with a central server.

    Detailed Circuit Connection Guide

    1. Power Management: Connect the VDD pins of the MKL16Z128VFT4 to a 3.3V power supply, ensuring stable voltage with capacitors near the supply lines for filtering. Ground connections should be made to the VSS pins.

    2. Clock Configuration: Attach a 32.768 kHz crystal oscillator to the EXTAL0 and XTAL0 pins for accurate timing, which is crucial for sensor data sampling and power management.

    3. Sensor Integration: Interface environmental sensors (like temperature or humidity sensors) to the MKL16Z128VFT4's ADC pins. For instance, connect a temperature sensor's output to the ADC0_SE8 pin for analog-to-digital conversion.

    4. Data Communication: Utilize UART interfaces for data transmission to a remote server. Connect the MKL16Z128VFT4's UART TX and RX pins to a wireless module's RX and TX pins, enabling serial communication.

    5. Firmware Programming and Debugging: Use the SWD (Serial Wire Debug) interface for programming the MKL16Z128VFT4. Connect the SWD_CLK and SWD_DIO to a compatible debugger/programmer. Include the RESET pin in this setup for enabling the MCU's reset during programming.

    6. Input/Output (GPIO) Utilization: Employ GPIO pins for control signals or to interface with additional modules like LEDs or buttons. For example, connect GPIO PTD4 to an LED indicator for system status display.

    7. Decoupling and Filtering: Place capacitors close to the power pins for noise reduction and smoother operation, especially in noisy environments.

    8. Input Protection: Add pull-up or pull-down resistors on the GPIOs, especially if they are used as inputs, to ensure they don't float and cause erratic behavior.

    Design Considerations

    - Power Optimization: Adjust the MCU's operating frequency and utilize its low-power modes for energy efficiency in remote applications.

    - Signal Integrity: Pay attention to PCB layout, especially for ADC and communication lines, to minimize interference and signal degradation.

    - Firmware Updatability: Consider implementing a mechanism for remote firmware updates to keep the system adaptable and secure.

    - Environmental Robustness: Ensure that the MCU and the entire system are protected against environmental factors like moisture, dust, and temperature extremes.

    Utilizing the capabilities of the MKL16Z128VFT4, this remote environmental sensing system can efficiently gather and transmit data, offering valuable insights into environmental conditions with minimal power consumption and reliable performance.

    MKL16Z128VFT4 informationMKL16Z128VFT4 information

    MKL16Z128VFT4 FAQ

    1. How to order MKL16Z128VFT4 on

    Currently, only provide peer-to-peer order processing. While you submit the RFQ, our professional agent will contact you with the competitive prices in the global market, and our agent will prompt you to finish the order if you accept our offers.

    2. How does guarantee that MKL16Z128VFT4 is from the original manufacturer or authorized agents?

    We have a professional and experienced quality control team to strictly verify and test the MKL16Z128VFT4. All suppliers must pass our qualification reviews before they can publish their products including MKL16Z128VFT4 on; we pay more attention to the channels and quality of MKL16Z128VFT4 products than any other customer. We strictly implement supplier audits, so you can purchase with confidence.

    3. Are the MKL16Z128VFT4 price and inventory displayed accurate?

    The price and inventory of MKL16Z128VFT4 fluctuates frequently and cannot be updated in time, it will be updated periodically within 24 hours. And, our quotation usually expires after 5 days.

    4. What forms of payment are accepted?

    Wire Transfer, PayPal, Alipay, Wechat, Credit Card, Western Union, MoneyGram, and Escrow are all acceptable.

    Warm Tips: Some orders in certain payment forms may require handling fee.

    5. How is the shipping arranged?

    Customers can choose industry-leading freight companies, including DHL, UPS, FedEx, TNT, and Registered Mail. Shipping insurance is also available.

    Once your order has been processed for shipment, our salesperson will send you an email advising you of the shipping status and tracking number.

    Warm Tips: It may take up to 24 hours for the carriers to display tracking information. Usually, express delivery takes 3-5 days, and registered mail takes 25-60 days.

    6. What is the process for return or replacement of MKL16Z128VFT4?

    All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment. If there is something wrong with the MKL16Z128VFT4 we delivered, we will accept the replacement or return of the MKL16Z128VFT4 only when all of the below conditions are fulfilled:

    (1)Such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.

    (2)We are informed of the defect described above within 90 days after the delivery of MKL16Z128VFT4.

    (3)The PartNo is unused and only in the original unpacked packaging.

    Two processes to return the products:

    (1)Inform us within 90 days

    (2)Obtain Requesting Return Authorizations

    7.How to contact us to get technical supports, such as MKL16Z128VFT4 pin diagram, MKL16Z128VFT4 datasheet?

    If you need any after-sales service, please do not hesitate to contact us.

    Hot Products







    Contact Us