What is the Additional Feature ?

Name: LT1962EMS8-3.3#PBF
Brand: Analog Devices Inc.
SKU: LT1962EMS8-3.3#PBF
Price: 2.40 USD
Availability: InStock
Rating: 5 (2 reviews)

Any Feature, including a modified Existing Feature, that is not an Existing Feature.

Cart ( )

lmages are for reference only See Product Specifications

Analog Devices Inc. LT1962EMS8-3.3#PBF

Part No.:: LT1962EMS8-3.3#PBF

Manufacturer:: Analog Devices Inc.

Package:: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Datasheet:: LT1962EMS8-3.3#PBF.pdf

Description:: IC REG LINEAR 3.3V 300MA 8MSOP

In Stock:: 2824

Quantity:: Add To Cart

For more detailed including pricing and shipping

: Quick response, quick quotation

: Flash shipment, no worries after sales

: Original channel, guarantee of the authentic products

Please send RFQ , we will respond immediately.

Purchase and inquiry

LT1962EMS8-3.3#PBF Specifications

Package/Case:
8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Packaging:
Tube
Series:
-
ProductStatus:
Active
OutputConfiguration:
Positive
OutputType:
Fixed
NumberofRegulators:
1
Voltage-Input(Max):
20V
Voltage-Output(Min/Fixed):
3.3V
Voltage-Output(Max):
-
VoltageDropout(Max):
0.43V @ 300mA
Current-Output:
300mA
Current-Quiescent(Iq):
-
Current-Supply(Max):
-
PSRR:
65dB (120Hz)
ControlFeatures:
Enable
ProtectionFeatures:
Over Current, Over Temperature, Reverse Polarity
OperatingTemperature:
-40°C ~ 125°C
MountingType:
Surface Mount

LT1962EMS8-3.3#PBF this integrated circuit is available in factory sealed anti static packs. at icwhale.com. Please read product page below detail information. including LT1962EMS8-3.3#PBF price, data-sheet, in-stock availability, technical difficulties. Also. Quickly Enter the access of compare listing to find out replaceable electronic parts. If you want to retrieve comprehensive data for LT1962EMS8-3.3#PBF to optimize the supply chain (including cross references, life-cycle, parametric, counterfeit risk, obsolescence managements forecasts), please contact to our Tech-supports team.

Purchase in icwhale.com

There is no doubt that you may place an order without registering to icwhale.com.

We strongly suggest you sign in our shop before purchasing as you can track your order real-time tracking.

Means of Payment in icwhale.com

For your convenience, we support multiple payment methods in USD, including PayPal, Credit Card, wire transfer. and Alipay.

RFQ (Request for Quotations) in icwhale.com

It is recommended to acquire for quotations to get the latest prices and inventories about the parts.

Our sales will reply to your request by email within 24 hours.

Warm reminder

1. You'll receive an order information email in your email inbox. (Please remember to check the spam folder if you didn't hear from us).

2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping & Handling

Shipping fee starts at $35, but some countries will exceed $35. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)

The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and countries.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, UPS and China Post.

Order Tracking for International Orders

Once your order has been shipped, the tracking number will be sent to the email address registered to your account. This information can also be viewed when logged into your account in the "my account" page.

LT1962EMS8-3.3#PBF information

Views：

LT1962EMS8-3.3#PBF Typical application Circuitry

LT1962EMS8-3.3#PBF

The LT1962EMS8-3.3#PBF is a member of the LT1962 series of low dropout (LDO) linear regulators, manufactured by Linear Technology. This particular model is characterized by its low noise output, making it ideal for sensitive applications such as RF and precision analog circuits. It offers a fixed output voltage of 3.3V and can deliver up to 300mA of output current. The device operates over a wide input voltage range from 2.7V to 20V, which makes it versatile for various applications.

1. VIN (Pin 1): This is the input voltage supply pin. The input power source has to be linked to it. It is recommended to use a capacitor (typically 1µF or higher) between this pin and ground to stabilize the input supply and filter out noise.

2. GND (Pin 2): The Ground pin. This should be connected to the system's ground plane for proper circuit operation.

3. VOUT (Pin 3): The output voltage pin provides a fixed 3.3V output. An output capacitor should be connected from this pin to ground to ensure the stability of the regulator. A typical value for the output capacitor is 10µF, but this can vary based on application requirements.

4. SHDN (Pin 4): The shutdown pin. Applying a low signal to this pin disables the regulator, reducing its quiescent current to a minimal level. This feature is useful for power-saving modes in battery-operated devices.

5. BYPS (Pin 5): The bypass pin is used for noise reduction. Connecting a small capacitor (typically 0.01µF) from this pin to ground can significantly reduce the output noise, enhancing the performance in noise-sensitive applications.

6. ADJ (Pin 6): The adjust pin, which is not used in the fixed voltage version (LT1962EMS8-3.3#PBF), is typically left unconnected or can be tied to VOUT in some designs.

7. SENSE (Pin 7): The sense pin is for remote voltage sensing. It is usually connected directly to the VOUT pin to provide accurate voltage regulation at the load.

8. PG (Pin 8): The power good (PG) pin is an open-drain output that goes low when the output voltage falls out of regulation. This can be used for power sequencing or as a diagnostic tool in complex systems.

The LT1962EMS8-3.3#PBF is particularly useful in applications where power supply noise can be detrimental to the performance of the system, such as precision instrumentation, medical devices, and high-end audio. Its low dropout voltage makes it suitable for applications with limited headroom between the input and output voltage, including battery-powered devices. The LT1962EMS8-3.3#PBF's small package size also makes it an excellent choice for space-constrained applications.

LT1962EMS8-3.3#PBF FAQ

1. How to order LT1962EMS8-3.3#PBF on icwhale.com?

Currently, icwhale.com only provide peer-to-peer order processing. While you submit the RFQ, our professional agent will contact you with the competitive prices in the global market, and our agent will prompt you to finish the order if you accept our offers.

2. How does icwhale.com guarantee that LT1962EMS8-3.3#PBF is from the original manufacturer or authorized agents?

We have a professional and experienced quality control team to strictly verify and test the LT1962EMS8-3.3#PBF. All suppliers must pass our qualification reviews before they can publish their products including LT1962EMS8-3.3#PBF on icwhale.com; we pay more attention to the channels and quality of LT1962EMS8-3.3#PBF products than any other customer. We strictly implement supplier audits, so you can purchase with confidence.

3. Are the LT1962EMS8-3.3#PBF price and inventory displayed accurate?

The price and inventory of LT1962EMS8-3.3#PBF fluctuates frequently and cannot be updated in time, it will be updated periodically within 24 hours. And, our quotation usually expires after 5 days.

4. What forms of payment are accepted?

Wire Transfer, PayPal, Alipay, Wechat, Credit Card, Western Union, MoneyGram, and Escrow are all acceptable.

Warm Tips: Some orders in certain payment forms may require handling fee.

5. How is the shipping arranged?

Customers can choose industry-leading freight companies, including DHL, UPS, FedEx, TNT, and Registered Mail. Shipping insurance is also available.

Once your order has been processed for shipment, our salesperson will send you an email advising you of the shipping status and tracking number.

Warm Tips: It may take up to 24 hours for the carriers to display tracking information. Usually, express delivery takes 3-5 days, and registered mail takes 25-60 days.

6. What is the process for return or replacement of LT1962EMS8-3.3#PBF?

All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment. If there is something wrong with the LT1962EMS8-3.3#PBF we delivered, we will accept the replacement or return of the LT1962EMS8-3.3#PBF only when all of the below conditions are fulfilled:

(1)Such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.

(2)We are informed of the defect described above within 90 days after the delivery of LT1962EMS8-3.3#PBF.

(3)The PartNo is unused and only in the original unpacked packaging.

Two processes to return the products:

(1)Inform us within 90 days

(2)Obtain Requesting Return Authorizations