What is the Additional Feature ?

Name: LM75AD,118
Brand: NXP USA Inc.
SKU: LM75AD,118
Price: 2.40 USD
Availability: InStock
Rating: 5 (2 reviews)

Any Feature, including a modified Existing Feature, that is not an Existing Feature.

Cart ( )

lmages are for reference only See Product Specifications

NXP USA Inc. LM75AD,118

Part No.:: LM75AD,118

Manufacturer:: NXP USA Inc.

Package:: 8-SOIC (0.154, 3.90mm Width)

Datasheet:: LM75AD,118.pdf

Description:: SENSOR DIGITAL -55C-125C 8SO

In Stock:: 2989

Quantity:: Add To Cart

For more detailed including pricing and shipping

: Quick response, quick quotation

: Flash shipment, no worries after sales

: Original channel, guarantee of the authentic products

Please send RFQ , we will respond immediately.

Purchase and inquiry

LM75AD,118 Specifications

Packaging:
Tape & Reel (TR),Cut Tape (CT),Digi-Reel®
Series:
-
ProductStatus:
Active
SensorType:
Digital, Local
SensingTemperature-Local:
-55°C ~ 125°C
SensingTemperature-Remote:
-
OutputType:
I²C
Voltage-Supply:
2.8V ~ 5.5V
Resolution:
11 b
Features:
Output Switch, Programmable Limit, Programmable Resolution, Shutdown Mode
Accuracy-Highest(Lowest):
±2°C (±3°C)
TestCondition:
-25°C ~ 100°C (-55°C ~ 125°C)
OperatingTemperature:
-55°C ~ 125°C
MountingType:
Surface Mount

LM75AD,118 this integrated circuit is available in factory sealed anti static packs. at icwhale.com. Please read product page below detail information. including LM75AD,118 price, data-sheet, in-stock availability, technical difficulties. Also. Quickly Enter the access of compare listing to find out replaceable electronic parts. If you want to retrieve comprehensive data for LM75AD,118 to optimize the supply chain (including cross references, life-cycle, parametric, counterfeit risk, obsolescence managements forecasts), please contact to our Tech-supports team.

Purchase in icwhale.com

There is no doubt that you may place an order without registering to icwhale.com.

We strongly suggest you sign in our shop before purchasing as you can track your order real-time tracking.

Means of Payment in icwhale.com

For your convenience, we support multiple payment methods in USD, including PayPal, Credit Card, wire transfer. and Alipay.

RFQ (Request for Quotations) in icwhale.com

It is recommended to acquire for quotations to get the latest prices and inventories about the parts.

Our sales will reply to your request by email within 24 hours.

Warm reminder

1. You'll receive an order information email in your email inbox. (Please remember to check the spam folder if you didn't hear from us).

2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping & Handling

Shipping fee starts at $35, but some countries will exceed $35. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)

The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and countries.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, UPS and China Post.

Order Tracking for International Orders

Once your order has been shipped, the tracking number will be sent to the email address registered to your account. This information can also be viewed when logged into your account in the "my account" page.

LM75AD,118 information

Views：

LM75AD,118 Typical application Circuitry

LM75AD,118

The LM75AD,118 is part of the LM75 series of integrated digital temperature sensors from Texas Instruments. These sensors are designed for I²C bus interface communication and provide accurate temperature readings without additional signal conditioning. The LM75AD,118, with its built-in analog-to-digital converter, can be used in various applications that require temperature monitoring, such as system thermal management, environmental control, and industrial equipment.

1. LM75AD,118 Series Attributes: The LM75AD,118 is renowned for its digital temperature measurement precision and its straightforward I²C bus communication interface.

2. Pin Configuration and Circuit Integration:

- VCC (Pin 8): This is the supply voltage pin, and it should be connected to a power source that falls within the sensor's voltage range.

- GND (Pin 4): The ground pin, which must be linked to the ground of the system.

- SDA (Pin 1): Serial Data Line for the I²C interface. It should be connected to the I²C data line on the microcontroller or processor, with a pull-up resistor typically required.

- SCL (Pin 2): Serial Clock Line for the I²C interface. Connect this to the I²C clock line on the microcontroller or processor, also with a pull-up resistor.

- OS (Pin 7): Overtemperature Shutdown output, an open-drain output that can be connected to an interrupt input on a microcontroller, with an external pull-up resistor if active monitoring is required.

- A0, A1, A2 (Pins 5, 6, 3 respectively): Address pins for setting the I²C address of the device. These pins can be connected to VCC or GND to establish one of several hardware addresses, allowing multiple devices on the same I²C bus.

3. Circuit Design Guidelines for LM75AD,118:

- Make sure the VCC is within the recommended operating range to ensure accurate temperature readings.

- Properly configure the pull-up resistors on the SDA and SCL lines based on the I²C bus specifications and the number of devices on the bus.

- Set the OS pin functionality according to your system requirements; it can be used as an interrupt for overtemperature protection or as a thermostat output.

4. Functional Features of LM75AD,118:

- The LM75AD,118 offers a digital temperature output with a 9-bit resolution.

- It has a programmable overtemperature alarm feature with a set point and hysteresis managed via the I²C bus.

5. LM75AD,118 Applications: Ideal for environmental controls, system thermal management, and personal computers where accurate temperature monitoring is essential.

When implementing the LM75AD,118 in a system, it's important to consider the specific needs for temperature monitoring, I²C communication, and device addressing. The datasheet and application notes from Texas Instruments for the LM75AD,118 provide detailed information on electrical characteristics, pin functions, and communication protocols, ensuring its effective use in temperature monitoring applications.

LM75AD,118 FAQ

1. How to order LM75AD,118 on icwhale.com?

Currently, icwhale.com only provide peer-to-peer order processing. While you submit the RFQ, our professional agent will contact you with the competitive prices in the global market, and our agent will prompt you to finish the order if you accept our offers.

2. How does icwhale.com guarantee that LM75AD,118 is from the original manufacturer or authorized agents?

We have a professional and experienced quality control team to strictly verify and test the LM75AD,118. All suppliers must pass our qualification reviews before they can publish their products including LM75AD,118 on icwhale.com; we pay more attention to the channels and quality of LM75AD,118 products than any other customer. We strictly implement supplier audits, so you can purchase with confidence.

3. Are the LM75AD,118 price and inventory displayed accurate?

The price and inventory of LM75AD,118 fluctuates frequently and cannot be updated in time, it will be updated periodically within 24 hours. And, our quotation usually expires after 5 days.

4. What forms of payment are accepted?

Wire Transfer, PayPal, Alipay, Wechat, Credit Card, Western Union, MoneyGram, and Escrow are all acceptable.

Warm Tips: Some orders in certain payment forms may require handling fee.

5. How is the shipping arranged?

Customers can choose industry-leading freight companies, including DHL, UPS, FedEx, TNT, and Registered Mail. Shipping insurance is also available.

Once your order has been processed for shipment, our salesperson will send you an email advising you of the shipping status and tracking number.

Warm Tips: It may take up to 24 hours for the carriers to display tracking information. Usually, express delivery takes 3-5 days, and registered mail takes 25-60 days.

6. What is the process for return or replacement of LM75AD,118?

All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment. If there is something wrong with the LM75AD,118 we delivered, we will accept the replacement or return of the LM75AD,118 only when all of the below conditions are fulfilled:

(1)Such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.

(2)We are informed of the defect described above within 90 days after the delivery of LM75AD,118.

(3)The PartNo is unused and only in the original unpacked packaging.

Two processes to return the products:

(1)Inform us within 90 days

(2)Obtain Requesting Return Authorizations