What is the Additional Feature ?

Name: ISO1410BDWR
Brand: Texas Instruments
SKU: ISO1410BDWR
Price: 2.40 USD
Availability: InStock
Rating: 5 (2 reviews)

Any Feature, including a modified Existing Feature, that is not an Existing Feature.

Cart ( )

lmages are for reference only See Product Specifications

Texas Instruments ISO1410BDWR

Part No.:: ISO1410BDWR

Manufacturer:: Texas Instruments

Package:: 16-SOIC (0.295, 7.50mm Width)

Datasheet:: ISO1410BDWR.pdf

Description:: IC TRANSCEIVER HALF 1/1 16SOIC

In Stock:: 2905

Quantity:: Add To Cart

For more detailed including pricing and shipping

: Quick response, quick quotation

: Flash shipment, no worries after sales

: Original channel, guarantee of the authentic products

Please send RFQ , we will respond immediately.

Purchase and inquiry

ISO1410BDWR Specifications

Package/Case:
16-SOIC (0.295, 7.50mm Width)
Packaging:
Tape & Reel (TR),Cut Tape (CT),Digi-Reel®
Series:
-
ProductStatus:
Active
Type:
Transceiver
Protocol:
RS422, RS485
NumberofDrivers/Receivers:
1/1
Duplex:
Half
ReceiverHysteresis:
30 mV
DataRate:
500kbps
Voltage-Supply:
1.71V ~ 1.89V, 2.25V ~ 5.5V
OperatingTemperature:
-40°C ~ 125°C (TA)
MountingType:
Surface Mount

ISO1410BDWR this integrated circuit is available in factory sealed anti static packs. at icwhale.com. Please read product page below detail information. including ISO1410BDWR price, data-sheet, in-stock availability, technical difficulties. Also. Quickly Enter the access of compare listing to find out replaceable electronic parts. If you want to retrieve comprehensive data for ISO1410BDWR to optimize the supply chain (including cross references, life-cycle, parametric, counterfeit risk, obsolescence managements forecasts), please contact to our Tech-supports team.

Purchase in icwhale.com

There is no doubt that you may place an order without registering to icwhale.com.

We strongly suggest you sign in our shop before purchasing as you can track your order real-time tracking.

Means of Payment in icwhale.com

For your convenience, we support multiple payment methods in USD, including PayPal, Credit Card, wire transfer. and Alipay.

RFQ (Request for Quotations) in icwhale.com

It is recommended to acquire for quotations to get the latest prices and inventories about the parts.

Our sales will reply to your request by email within 24 hours.

Warm reminder

1. You'll receive an order information email in your email inbox. (Please remember to check the spam folder if you didn't hear from us).

2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping & Handling

Shipping fee starts at $35, but some countries will exceed $35. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)

The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and countries.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, UPS and China Post.

Order Tracking for International Orders

Once your order has been shipped, the tracking number will be sent to the email address registered to your account. This information can also be viewed when logged into your account in the "my account" page.

ISO1410BDWR information

Views：

ISO1410BDWR Typical application Circuitry

The ISO1410BDWR is a high-performance, digital isolator chip from Texas Instruments. It is intended to offer isolating functions in a wide variety of applications, including data communication and industrial applications where it can replace optocouplers.

Notable attributes of the ISO1410BDWR include:

1. High-Speed Performance: The ISO1410BDWR boasts fast, reliable performance with a typical propagation delay of just 11 ns and a maximum of 14 ns.

2. Robust Isolation: The chip can provide up to 2500Vrms isolation for 1 minute per UL1577, ensuring safety in high-voltage environments.

3. Noise Immunity: It offers excellent noise immunity characterized by a transient immunity of 50 kV/µs.

4. High Data Rates: The isolator supports data rates up to 100 Mbps, allowing for fast, efficient data transmission.

A typical application for the ISO1410BDWR could be in a CAN bus system for industrial control applications. Here's a detailed outline for its circuit setup:

1. Power Supply: Connect VCC1 (pin 2) to a +3.3V or +5V supply, and GND1 (pin 3) to the system ground on the side one. Similarly, connect VCC2 (pin 6) to the power supply, and GND2 (pin 5) to the ground on the side two.

2. Data Inputs/Outputs: Connect the data line from your controller to IN1 (pin 1). The isolated data output can be taken from OUT2 (pin 8). For bidirectional data transfer, connect the other data line to IN2 (pin 4) and OUT1 (pin 7).

3. Termination Resistors: In a CAN bus system, termination resistors (usually 120 ohms) are needed at both ends of the bus. Make sure to incorporate these resistors in your design.

When working with the ISO1410BDWR, the following considerations should be taken into account:

- Power Supply Decoupling: Attach decoupling capacitors near the VCC and GND pins to reduce noise.

- Signal Integrity: Proper layout and routing of the PCB can help to maintain signal integrity and reduce electromagnetic interference.

- Thermal Management: Ensure that the device does not exceed the maximum junction temperature by employing effective thermal management techniques.

- Safety Standards Compliance: If the ISO1410BDWR is used in safety-critical applications, ensure the design meets relevant safety standards.

To sum up, the ISO1410BDWR is a high-performance, reliable choice for applications requiring digital signal isolation, such as industrial automation, data communication, and power supplies.

ISO1410BDWR FAQ

1. How to order ISO1410BDWR on icwhale.com?

Currently, icwhale.com only provide peer-to-peer order processing. While you submit the RFQ, our professional agent will contact you with the competitive prices in the global market, and our agent will prompt you to finish the order if you accept our offers.

2. How does icwhale.com guarantee that ISO1410BDWR is from the original manufacturer or authorized agents?

We have a professional and experienced quality control team to strictly verify and test the ISO1410BDWR. All suppliers must pass our qualification reviews before they can publish their products including ISO1410BDWR on icwhale.com; we pay more attention to the channels and quality of ISO1410BDWR products than any other customer. We strictly implement supplier audits, so you can purchase with confidence.

3. Are the ISO1410BDWR price and inventory displayed accurate?

The price and inventory of ISO1410BDWR fluctuates frequently and cannot be updated in time, it will be updated periodically within 24 hours. And, our quotation usually expires after 5 days.

4. What forms of payment are accepted?

Wire Transfer, PayPal, Alipay, Wechat, Credit Card, Western Union, MoneyGram, and Escrow are all acceptable.

Warm Tips: Some orders in certain payment forms may require handling fee.

5. How is the shipping arranged?

Customers can choose industry-leading freight companies, including DHL, UPS, FedEx, TNT, and Registered Mail. Shipping insurance is also available.

Once your order has been processed for shipment, our salesperson will send you an email advising you of the shipping status and tracking number.

Warm Tips: It may take up to 24 hours for the carriers to display tracking information. Usually, express delivery takes 3-5 days, and registered mail takes 25-60 days.

6. What is the process for return or replacement of ISO1410BDWR?

All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment. If there is something wrong with the ISO1410BDWR we delivered, we will accept the replacement or return of the ISO1410BDWR only when all of the below conditions are fulfilled:

(1)Such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.

(2)We are informed of the defect described above within 90 days after the delivery of ISO1410BDWR.

(3)The PartNo is unused and only in the original unpacked packaging.

Two processes to return the products:

(1)Inform us within 90 days

(2)Obtain Requesting Return Authorizations