What is the Additional Feature ?

Name: FT230XQ-T
Brand: FTDI, Future Technology Devices International Ltd
SKU: FT230XQ-T
Price: 2.40 USD
Availability: InStock
Rating: 5 (2 reviews)

Any Feature, including a modified Existing Feature, that is not an Existing Feature.

Cart ( )

lmages are for reference only See Product Specifications

FTDI, Future Technology Devices International Ltd FT230XQ-T

Part No.:: FT230XQ-T

Manufacturer:: FTDI, Future Technology Devices International Ltd

Package:: 16-WQFN Exposed Pad

Datasheet:: FT230XQ-T.pdf

Description:: IC USB SERIAL BASIC UART 16QFN

In Stock:: 2259

Quantity:: Add To Cart

For more detailed including pricing and shipping

: Quick response, quick quotation

: Flash shipment, no worries after sales

: Original channel, guarantee of the authentic products

Please send RFQ , we will respond immediately.

Purchase and inquiry

FT230XQ-T Specifications

Package/Case:
16-WQFN Exposed Pad
Packaging:
Tray
Series:
USBmadeEZ-UART, FT-X, X-Chip
ProductStatus:
Active
Protocol:
USB
Function:
Bridge, USB to UART
Interface:
UART
Standards:
USB 2.0
Voltage-Supply:
3.3V ~ 5V
Current-Supply:
8mA
OperatingTemperature:
-40°C ~ 85°C

FT230XQ-T this integrated circuit is available in factory sealed anti static packs. at icwhale.com. Please read product page below detail information. including FT230XQ-T price, data-sheet, in-stock availability, technical difficulties. Also. Quickly Enter the access of compare listing to find out replaceable electronic parts. If you want to retrieve comprehensive data for FT230XQ-T to optimize the supply chain (including cross references, life-cycle, parametric, counterfeit risk, obsolescence managements forecasts), please contact to our Tech-supports team.

Purchase in icwhale.com

There is no doubt that you may place an order without registering to icwhale.com.

We strongly suggest you sign in our shop before purchasing as you can track your order real-time tracking.

Means of Payment in icwhale.com

For your convenience, we support multiple payment methods in USD, including PayPal, Credit Card, wire transfer. and Alipay.

RFQ (Request for Quotations) in icwhale.com

It is recommended to acquire for quotations to get the latest prices and inventories about the parts.

Our sales will reply to your request by email within 24 hours.

Warm reminder

1. You'll receive an order information email in your email inbox. (Please remember to check the spam folder if you didn't hear from us).

2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping & Handling

Shipping fee starts at $35, but some countries will exceed $35. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)

The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and countries.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, UPS and China Post.

Order Tracking for International Orders

Once your order has been shipped, the tracking number will be sent to the email address registered to your account. This information can also be viewed when logged into your account in the "my account" page.

FT230XQ-T information

Views：

FT230XQ-T Typical application Circuitry

The FT230XQ-T is a USB to basic UART (Universal Asynchronous Receiver/Transmitter) interface chip developed by FTDI. It is designed to provide a simple and cost-effective way to add USB connectivity to a device with a UART interface. This chip is commonly used in applications such as USB-to-serial converters, USB instrumentation, and USB communication devices.

Functionality: The FT230XQ-T acts as a bridge between a USB port and a UART interface, enabling devices with UART interfaces to communicate with USB-equipped computers or other USB hosts.

Applications: This chip is suitable for applications that require USB-to-serial conversion, such as programming and debugging of microcontrollers, interfacing with sensors or other peripherals, and creating custom USB communication devices.

Parameters: The FT230XQ-T supports USB 2.0 Full Speed (12 Mbps), offers baud rates up to 3 Mbps for UART communication, and provides configurable I/O voltage levels (3.3V or 5V).

Specific Circuit Design for a USB-to-Serial Converter:

1. Power Supply: Connect the VCC pin (pin 17) of the FT230XQ-T to a 3.3V power source. The GND pin (pin 4) should be connected to the ground of your power supply.

2. USB Connection: Attach the USB pins (D+ and D-) of the FT230XQ-T to the corresponding D+ and D- pins of a USB connector. The USB connector can then be connected to a USB port on a computer.

3. UART Configuration: Connect the TXD (Transmit Data) pin (pin 1) of the FT230XQ-T to the RXD (Receive Data) pin of your target UART device. Connect the RXD pin (pin 5) of the FT230XQ-T to the TXD pin of the target device.

4. Optional Flow Control: If hardware flow control is required, connect the CTS (Clear To Send) pin (pin 2) of the FT230XQ-T to the RTS (Request To Send) pin of the target device, and vice versa.

5. USB Enumeration: Connect the CBUS3 pin (pin 3) to the VCC pin through a 10kΩ resistor. This configuration is required for proper USB enumeration.

Design Considerations:

- Power Supply: Ensure that the power supply voltage is compatible with the I/O voltage level of the connected devices.

- USB Compliance: Make sure the USB connector and wiring comply with USB specifications to ensure proper connectivity and data transfer.

- Signal Integrity: Use proper PCB layout techniques to maintain signal integrity, especially for the USB differential signals.

- Driver Installation: Verify that the correct FTDI drivers are installed on the computer for the FT230XQ-T to function properly.

- Device Configuration: If necessary, use the FTDI FT_Prog utility to configure the device settings, such as baud rate and flow control options, according to your application needs.

By following these detailed guidelines and implementing the outlined circuit design, the FT230XQ-T can be effectively integrated into various applications requiring USB-to-serial conversion.

FT230XQ-T FAQ

1. How to order FT230XQ-T on icwhale.com?

Currently, icwhale.com only provide peer-to-peer order processing. While you submit the RFQ, our professional agent will contact you with the competitive prices in the global market, and our agent will prompt you to finish the order if you accept our offers.

2. How does icwhale.com guarantee that FT230XQ-T is from the original manufacturer or authorized agents?

We have a professional and experienced quality control team to strictly verify and test the FT230XQ-T. All suppliers must pass our qualification reviews before they can publish their products including FT230XQ-T on icwhale.com; we pay more attention to the channels and quality of FT230XQ-T products than any other customer. We strictly implement supplier audits, so you can purchase with confidence.

3. Are the FT230XQ-T price and inventory displayed accurate?

The price and inventory of FT230XQ-T fluctuates frequently and cannot be updated in time, it will be updated periodically within 24 hours. And, our quotation usually expires after 5 days.

4. What forms of payment are accepted?

Wire Transfer, PayPal, Alipay, Wechat, Credit Card, Western Union, MoneyGram, and Escrow are all acceptable.

Warm Tips: Some orders in certain payment forms may require handling fee.

5. How is the shipping arranged?

Customers can choose industry-leading freight companies, including DHL, UPS, FedEx, TNT, and Registered Mail. Shipping insurance is also available.

Once your order has been processed for shipment, our salesperson will send you an email advising you of the shipping status and tracking number.

Warm Tips: It may take up to 24 hours for the carriers to display tracking information. Usually, express delivery takes 3-5 days, and registered mail takes 25-60 days.

6. What is the process for return or replacement of FT230XQ-T?

All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment. If there is something wrong with the FT230XQ-T we delivered, we will accept the replacement or return of the FT230XQ-T only when all of the below conditions are fulfilled:

(1)Such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.

(2)We are informed of the defect described above within 90 days after the delivery of FT230XQ-T.

(3)The PartNo is unused and only in the original unpacked packaging.

Two processes to return the products:

(1)Inform us within 90 days

(2)Obtain Requesting Return Authorizations