What is the Additional Feature ?

Name: 88E1548-A1-BAM2C000
Brand: Marvell Semiconductor, Inc.
SKU: 88E1548-A1-BAM2C000
Price: 2.40 USD
Availability: InStock
Rating: 5 (2 reviews)

Any Feature, including a modified Existing Feature, that is not an Existing Feature.

Cart ( )

lmages are for reference only See Product Specifications

Marvell Semiconductor, Inc. 88E1548-A1-BAM2C000

Part No.:: 88E1548-A1-BAM2C000

Manufacturer:: Marvell Semiconductor, Inc.

Package:: 196-LBGA

Datasheet:: 88E1548-A1-BAM2C000.pdf

Description:: IC TXRX FULL/HALF 4/4 196TFBGA

In Stock:: 3275

Quantity:: Add To Cart

For more detailed including pricing and shipping

: Quick response, quick quotation

: Flash shipment, no worries after sales

: Original channel, guarantee of the authentic products

Please send RFQ , we will respond immediately.

Purchase and inquiry

88E1548-A1-BAM2C000 Specifications

Package/Case:
196-LBGA
Packaging:
Tray
Series:
Alaska®
ProductStatus:
Active
Type:
Transceiver
Protocol:
IEEE 1149.1, IEEE 802.3
NumberofDrivers/Receivers:
4/4
Duplex:
Full, Half
ReceiverHysteresis:
360 mV
DataRate:
10Mbps, 100Mbps, 1Gbps
Voltage-Supply:
1.71V ~ 1.89V, 2.38V ~ 2.63V, 3.13V ~ 3.47V
OperatingTemperature:
0°C ~ 70°C (TA)
MountingType:
Surface Mount

88E1548-A1-BAM2C000 this integrated circuit is available in factory sealed anti static packs. at icwhale.com. Please read product page below detail information. including 88E1548-A1-BAM2C000 price, data-sheet, in-stock availability, technical difficulties. Also. Quickly Enter the access of compare listing to find out replaceable electronic parts. If you want to retrieve comprehensive data for 88E1548-A1-BAM2C000 to optimize the supply chain (including cross references, life-cycle, parametric, counterfeit risk, obsolescence managements forecasts), please contact to our Tech-supports team.

Purchase in icwhale.com

There is no doubt that you may place an order without registering to icwhale.com.

We strongly suggest you sign in our shop before purchasing as you can track your order real-time tracking.

Means of Payment in icwhale.com

For your convenience, we support multiple payment methods in USD, including PayPal, Credit Card, wire transfer. and Alipay.

RFQ (Request for Quotations) in icwhale.com

It is recommended to acquire for quotations to get the latest prices and inventories about the parts.

Our sales will reply to your request by email within 24 hours.

Warm reminder

1. You'll receive an order information email in your email inbox. (Please remember to check the spam folder if you didn't hear from us).

2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping & Handling

Shipping fee starts at $35, but some countries will exceed $35. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)

The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and countries.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, UPS and China Post.

Order Tracking for International Orders

Once your order has been shipped, the tracking number will be sent to the email address registered to your account. This information can also be viewed when logged into your account in the "my account" page.

88E1548-A1-BAM2C000 information

Views：

88E1548-A1-BAM2C000 Typical application Circuitry

The 88E1548-A1-BAM2C000 is a component developed by Marvell. It belongs to the family of Ethernet PHYs (Physical Layer Transceivers), designed to provide Ethernet connectivity solutions, especially for high-speed applications.

Applications:

1. Data Center Networking: Used in high-performance switches and routers.

2. Enterprise Networking Equipment: Implemented in office switches, routers, and firewalls.

3. High-Performance Computing: Critical for machines demanding robust Ethernet connections.

4. Carrier Equipment: For high-speed telecommunications infrastructure.

Specifications:

1. High-Speed Capability: Specifically designed for gigabit Ethernet, it can handle GbE speeds efficiently.

2. Energy-Efficient: Adheres to the Energy Efficient Ethernet standards, conserving power when possible.

3. Advanced Features: Might include features like time synchronization, advanced power management, and security functions.

4. Interface Flexibility: Like other PHYs, it should support RGMII/MII among other interfaces.

Circuit Connection:

Let's dive into the scenario of integrating the 88E1548-A1-BAM2C000 into an enterprise-grade network switch:

1. Power Management:

- Attach both analog and digital power pins to the respective power sources. Make sure to connect all necessary ground pins properly.

2. Ethernet Interface:

- Ethernet TX and RX differential pairs must be carefully connected to corresponding points on the Ethernet jack. Employ isolation transformers for these pairs to maintain signal quality.

3. Connecting to a Network Processor:

- If using an RGMII interface, interconnect RGMII pins such as TXD, RXD between the PHY and the network processor. The reference clock pins (like CLK_OUT) must be connected to provide synchronization.

4. Configuration and Control:

- The 88E1548-A1-BAM2C000's configuration pins allow for customization of its behavior. They can be set appropriately using pull-up or pull-down resistors. A RESET pin, often active low, may be tied to a reset mechanism for initialization purposes.

Design Considerations:

1. PCB Layout: Given the high-speed nature of GbE, the PCB layout demands utmost attention. Differential pairs should be routed with care, maintaining consistent impedance.

2. Noise Management: Decoupling capacitors must be placed close to power pins. Proper grounding is essential to minimize system noise.

3. Protection Measures: Integrate ESD protection for the Ethernet interface. Consider overvoltage and overcurrent protection too.

4. Thermal Considerations: Ensure there's adequate cooling, possibly through heat sinks or airflow, especially when deploying multiple 88E1548-A1-BAM2C000 units close together.

Conclusively, the 88E1548-A1-BAM2C000 stands out as a robust solution for various high-speed Ethernet applications. Proper design and layout practices are essential to leverage its full potential effectively.

88E1548-A1-BAM2C000 FAQ

1. How to order 88E1548-A1-BAM2C000 on icwhale.com?

Currently, icwhale.com only provide peer-to-peer order processing. While you submit the RFQ, our professional agent will contact you with the competitive prices in the global market, and our agent will prompt you to finish the order if you accept our offers.

2. How does icwhale.com guarantee that 88E1548-A1-BAM2C000 is from the original manufacturer or authorized agents?

We have a professional and experienced quality control team to strictly verify and test the 88E1548-A1-BAM2C000. All suppliers must pass our qualification reviews before they can publish their products including 88E1548-A1-BAM2C000 on icwhale.com; we pay more attention to the channels and quality of 88E1548-A1-BAM2C000 products than any other customer. We strictly implement supplier audits, so you can purchase with confidence.

3. Are the 88E1548-A1-BAM2C000 price and inventory displayed accurate?

The price and inventory of 88E1548-A1-BAM2C000 fluctuates frequently and cannot be updated in time, it will be updated periodically within 24 hours. And, our quotation usually expires after 5 days.

4. What forms of payment are accepted?

Wire Transfer, PayPal, Alipay, Wechat, Credit Card, Western Union, MoneyGram, and Escrow are all acceptable.

Warm Tips: Some orders in certain payment forms may require handling fee.

5. How is the shipping arranged?

Customers can choose industry-leading freight companies, including DHL, UPS, FedEx, TNT, and Registered Mail. Shipping insurance is also available.

Once your order has been processed for shipment, our salesperson will send you an email advising you of the shipping status and tracking number.

Warm Tips: It may take up to 24 hours for the carriers to display tracking information. Usually, express delivery takes 3-5 days, and registered mail takes 25-60 days.

6. What is the process for return or replacement of 88E1548-A1-BAM2C000?

All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment. If there is something wrong with the 88E1548-A1-BAM2C000 we delivered, we will accept the replacement or return of the 88E1548-A1-BAM2C000 only when all of the below conditions are fulfilled:

(1)Such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.

(2)We are informed of the defect described above within 90 days after the delivery of 88E1548-A1-BAM2C000.

(3)The PartNo is unused and only in the original unpacked packaging.

Two processes to return the products:

(1)Inform us within 90 days

(2)Obtain Requesting Return Authorizations